Repair

Most solvent based adhesives are flammable. Always work in a ventilated area and do not breathe in vapours. Avoid exposing the product to any ignition sources. Do not smoke when working with adhesives.

Bostik Mounting Tape Strips are designed for one-time use. Attempting to reuse them may result in reduced adhesion and may not securely mount the object. For repositioning, it's recommended to use new Mounting Tape Strips for optimal results.

While Bostik Mounting Tape is designed for use on smooth surfaces such as tiles, metal, wood, glass, and fiberglass, it's not suitable for rough or crumbly surfaces. Ensure the surface is clean, dry, and free from dust or grease for optimal adhesion.

Wet and dried adhesive on applicator tools can be cleaned with acetone, thinners or parrafin. Please refer to the Technical Data Sheet of the specific product for more information.

Discover our new Bostik Glue Guide to discover what product to use.

Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.

Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of days due to general wear and tear and the natural oils in the skin. If skin irritation occurs, consult a doctor.

To remove mounted objects, carefully peel them off the surface. Start from one corner and gently pull away, avoiding sudden jerks that could damage the surface. If residue remains, use an adhesive remover like our Bostik Glu Go or rubbing alcohol to clean the area.

Adhesive residue from most sticky tapes can be removed with acetone. Always test a small area first.

Most adhesives have a shelf life of at least 12 months if stored in a cool (below 25°C), dry place in its original moisture-tight container. If the material is kept beyond the recommended shelf life, it is not necessarily unusable, but a check should be performed to observe whether the product is still workable, apply-able and uncured.

We recommend storing in a refrigerator to lengthen the shelf life. Refrigerated packaging should be allowed to return to room temperature prior to use.

Wet adhesive can be removed using a solvent such as acetone, applied with a clean cloth. For dried adhesive, it can be removed mechanically or softened with acetone before wiping away. Always test first to ensure the plastic is not affected.

Ensure surfaces are clean, dry, and free from dust or grease. Lightly abrade and clean with a solvent for better adhesion. Apply an even layer of adhesive to both surfaces, allow it to become tacky, then press firmly together. Full bond strength typically develops after 24 hours.

Please call our Sticky Questions toll free helpline during office hours on 0800 222 400, or send an email [email protected].

The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.

A strong polyurethane-based plastic glue like Bostik Soft Plastics is designed for durable, long-lasting bonding on many plastics. It provides a flexible, waterproof bond and adheres well to materials such as PVC, ABS, Perspex, and solid polystyrene.

Our Glue Guide can help you find the best adhesive for your application.