HEAVY DUTY MOUNTING TAPE BULK BUY (25M)

Double-thick mounting tape, perfect for mirrors, tiles, and framed pictures. Ideal for both indoor and outdoor use on various smooth surfaces.

Colours

White

Sizes
25 m x 24 mm x 3 m

Features & benefits

Bostik Heavy Duty Mounting Tape is double thickness and ideal for interior & exterior use, to mount mirrors, mirror tiles & framed pictures on smooth surfaces such as tiles, metal, wood, board, stone, glass & fibreglass. Product must be removed mechanically. Adhesive residue can be removed with acetone.

Do not use to hang objects of value, or use for hanging objects above a bed. Not suitable for use on rough or crumbly surfaces. Keep out of reach of children and pets. The above information is offered as a guide to the use of this product. We cannot accept liability for damages as this product is used outside our control.

Downloads & resources

Bostik DIY South Africa Repair - Heavy Duty Mounting Tape Roll 25M Technical Data Sheet (992.15 KB)

How to use

Ensure the surface is smooth, clean, dry and free from dust and grease. Press the adhesive side of the tape firmly onto the object to be mounted. Peel off the backing paper, position the object & apply firm pressure for 60 seconds. Final holding strength will be achieved after 24 hours.

Product must be removed mechanically. Adhesive residue can be removed with acetone.

FAQs

Can I reuse Bostik Mounting Tape Strips

Bostik Mounting Tape Strips are designed for one-time use. Attempting to reuse them may result in reduced adhesion and may not securely mount the object. For repositioning, it's recommended to use new Mounting Tape Strips for optimal results.

Can I use Bostik Mounting Tape Strips on all surfaces?

While Bostik Mounting Tape is designed for use on smooth surfaces such as tiles, metal, wood, glass, and fiberglass, it's not suitable for rough or crumbly surfaces. Ensure the surface is clean, dry, and free from dust or grease for optimal adhesion.

How do I remove objects mounted with Bostik Mounting Tape Strips?

To remove mounted objects, carefully peel them off the surface. Start from one corner and gently pull away, avoiding sudden jerks that could damage the surface. If residue remains, use an adhesive remover like our Bostik Glu Go or rubbing alcohol to clean the area.

See all FAQs

Find new, smarter ways of doing things.

gecko.png

Find out what product you need, how to use it and where to buy it.

PRODUCT FINDER