INDUSTRIAL STRENGTH MOUNTING TAPE
High-performance mounting tape for indoor/outdoor use, replacing rivets, screws, and welding. Ideal for attaching signage to various surfaces like metal, wood, and glass.
White
Features & benefits
Bostik Industrial Strength Mounting Tape eliminates the use of rivets, screws and welding and is suitable for interior and exterior use, to fix body & roof panels in the bus & truck industry and for mounting outside signage onto smooth surfaces such as tiles, metal, wood, board, stone, glass and fiberglass.
Certain porous surfaces such as plaster & concrete, and absorbent surfaces such as untreated wood & fabrics, will require priming or sealing. Will not bond to olypropylene, polyethylene and Teflon plastics. Full bond strength is achieved after 72 hours. Keep out of reach of children and pets. The above information is offered as a guide to the use of this product. We cannot accept liability for damages as this product is used outside our control.
Downloads & resources
Bostik DIY South Africa Repair - Industrial Strength Mounting Tape Technical Data Sheet (993.42 KB)
How to use
Ensure the surface is smooth, clean, dry and free from dust and grease. Press the adhesive side of the tape firmly onto the object to be mounted. Peel off the backing paper, position the object & apply firm pressure for 60 seconds. Final holding strength will be achieved after 24 hours.
Product must be removed mechanically. Adhesive residue can be removed with acetone.
FAQs
Can I reuse Bostik Mounting Tape Strips
Bostik Mounting Tape Strips are designed for one-time use. Attempting to reuse them may result in reduced adhesion and may not securely mount the object. For repositioning, it's recommended to use new Mounting Tape Strips for optimal results.
Can I use Bostik Mounting Tape Strips on all surfaces?
While Bostik Mounting Tape is designed for use on smooth surfaces such as tiles, metal, wood, glass, and fiberglass, it's not suitable for rough or crumbly surfaces. Ensure the surface is clean, dry, and free from dust or grease for optimal adhesion.
How do I remove objects mounted with Bostik Mounting Tape Strips?
To remove mounted objects, carefully peel them off the surface. Start from one corner and gently pull away, avoiding sudden jerks that could damage the surface. If residue remains, use an adhesive remover like our Bostik Glu Go or rubbing alcohol to clean the area.
How do I store my adhesive?
Most adhesives have a shelf life of at least 12 months if stored in a cool (below 25°C), dry place in its original moisture-tight container. If the material is kept beyond the recommended shelf life, it is not necessarily unusable, but a check should be performed to observe whether the product is still workable, apply-able and uncured.
What is the shelf life of the adhesive i bought and where can i store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.
How do I prepare the surfaces to be glued?
Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.
I need more technical advice on this product?
Please call our Sticky Questions toll free helpline during office hours on 0800 222 400, or send an email [email protected].
How do I remove sticky residue from tapes?
Adhesive residue from most sticky tapes can be removed with acetone. Always test a small area first.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide