ANTI-SLIP GRIP TAPE (BLACK)
Non-slip tape for smooth surfaces, indoors or outdoors. Ideal for stairs, ramps, boats, ladders, and more, reducing slip hazards effectively
Black
Features & benefits
Bostik Anti-Slip Grip Tape reduces the risk of slips & falls onsmooth surfaces. Suitable for indoor & outdoor use on staircases, wheelchair ramps, boats, ladders, caravans, bathroom floors and around swimming pools. This product may deteriorate after a period of use. Always inspect the application area and replace it if wear and tear has occurred. Keep out of reach of children and pets. The above information is offered as a guide to the use of this product. We cannot accept liability for damages as this product is used outside our control.
Downloads & resources
Bostik DIY South Africa Rapair - Anti Slip Grip Tape 5m Technical Data Sheet (1001.86 KB)
How to use
Application Instructions:
Ensure the surface is smooth, clean, dry and free from dust and grease. Prime and seal unpainted wood and concrete surfaces. Cut the tape, with rounded corners, to the desired length. Peel off the backing paper and place into the desired position. Apply sufficient pressure on the area, starting from the centre and working toward the ends, to attain maximum bond.
Removal Instructions:
Remove the tape by peeling or scraping it off the surface. Using a wire brush, remove any excess adhesive. Use a clean white cloth, dampened with mineral spirits, to remove any further residue.
FAQs
Can I reuse Bostik Mounting Tape Strips
Bostik Mounting Tape Strips are designed for one-time use. Attempting to reuse them may result in reduced adhesion and may not securely mount the object. For repositioning, it's recommended to use new Mounting Tape Strips for optimal results.
Can I use Bostik Mounting Tape Strips on all surfaces?
While Bostik Mounting Tape is designed for use on smooth surfaces such as tiles, metal, wood, glass, and fiberglass, it's not suitable for rough or crumbly surfaces. Ensure the surface is clean, dry, and free from dust or grease for optimal adhesion.
How do I remove objects mounted with Bostik Mounting Tape Strips?
To remove mounted objects, carefully peel them off the surface. Start from one corner and gently pull away, avoiding sudden jerks that could damage the surface. If residue remains, use an adhesive remover like our Bostik Glu Go or rubbing alcohol to clean the area.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER