Create

Glue gun sticks are not typically associated with toxic fumes during normal use. However, the fumes produced when using a glue gun may irritate some people who have respiratory sensitivities or existing breathing conditions.

For safe use, operate glue guns in a well-ventilated area and avoid prolonged exposure to fumes. As with many products that generate fumes when heated, care should be taken when using glue guns in environments where the fumes could come into contact with an ignition source.

Both Bostik Hot Melt Glue Gun and Bostik Cool Melt Glue Gun should be used according to their instructions and with appropriate ventilation during use.

Yes - Bostik Tape Discs are recyclable as they are made from paper. When used in gift wrapping, be sure to choose recyclable gift wrap so once the present has been opened, all of the paper can easily be recycled.

Also, the sheets that our sticky circles are supplied on are made of polyester which can be disposed with your plastic waste recycling.

Yes, a glue stick can be used on photographs. Bostik Blu Stick is suitable for photographs and other paper-based materials, making it a practical choice for scrapbooking, craft projects and photo displays.

Bostik Blu Stick is a solvent-free adhesive that goes on blue for accurate application and dries clear for a neat finish.

It is also suitable for materials such as card, tissue paper and crepe paper, making it useful for a wide range of creative projects involving photos and paper crafts.

Yes - you can use our double sided sticky pads for mirrors. Bostik Foam Pads are acid and lignin-free meaning they will not mark or stain a mirrored surface.

No, Bostik Blu Stick does not dry blue. It goes on blue so you can see where the adhesive has been applied, then dries clear for a neat finish.

The temporary blue colour helps improve application accuracy on paper, card, photographs and other paper-based materials, while the dried adhesive remains clear once set.

Bostik PVA Glue is white when applied and dries clear, also referred to as drying transparent or opalescent. 

To remove a glue stick from a glue gun, allow the glue gun to warm up so the adhesive softens. Once warm, gently pull the remaining glue stick from the back of the gun and insert a new glue stick if needed.

Both Bostik Hot Melt Glue Gun and Bostik Cool Melt Glue Gun are designed to be used with replacement glue sticks, which can be fed through the gun as the adhesive is consumed.

If a glue stick is difficult to remove, avoid forcing it out while the gun is cold, as this may damage the glue stick or interfere with normal operation.

The lifespan of a glue gun depends on how often it is used and how well it is maintained. In some cases, a glue gun may stop working because a glue stick becomes jammed inside the gun, causing a blockage in the nozzle.

To help keep your glue gun working properly, use glue sticks that are suitable for your glue gun and check for any blockages if the adhesive stops flowing normally.

Both Bostik Hot Melt Glue Gun and Bostik Cool Melt Glue Gun are designed to be used with compatible replacement glue sticks for ongoing craft, hobby and DIY applications.

Bostik Sticky Tape offers 50m of adhesive tape at 24mm in width.

Fun Fact: Sticky Tape will go the length of an Olympic swimming pool, two tennis courts, the Arc de Triomphe in Paris or the length of 16 Siberian tigers in a line!

About 0.5 grams of Blu Tack can support approximately 105 grams in weight. However, Blu Tack is designed for lightweight items and should not be used to support heavy objects.

The amount of weight Blu Tack can hold may vary depending on the surface, the object being mounted and how the adhesive is applied.

Bostik Fast Tak Permanent spray adhesive can be dissolved by dabbing the adhesive with a clean, dampened cloth of white spirit.

To remove Bostik Blu Tack® from carpet, first remove as much of the adhesive as possible. Blu Tack® can often be lifted away by rolling it off the surface, and any remaining pieces can be removed using more Blu Tack®.

For detailed step-by-step guidance, see our guide: How to remove Blu Tack® from carpet. This provides further advice on removing Blu Tack® residue from carpet fibres safely and effectively.

If Sticky Tape has been stuck onto a hard surface for a long period of time, when you come to remove it, there may be some glue residue left behind. However, you can easily remove sticky tape residue from glass, plastic, clothing and more.

First, try to remove as much of the sticky residue with your fingers. Then you can use hot water with a few drops of detergent or canola or olive oil to soften any stubborn adhesive. You can then gently scrape away the residue with a plastic scraper or your fingers.

Alternative methods can be heating the glue residue with a hairdryer. The hot air will help loosen the adhesive and you can then scrape to remove.

Bostik Blu Tack® White and Bostik Blu Tack® are both reusable adhesives designed for temporary fixing and mounting applications. The main difference is the colour, with one supplied in white and the other in blue.

Both products can be used for holding up posters, paper, card and decorations, and both can be removed and reused multiple times.

The choice is generally based on which colour is preferred for the intended application.

Most solvent-based adhesives are flammable. When using Fast Tak always work in a ventilated area and do not breathe in vapours. Avoid exposing the product to any ignition sources. Do not smoke when working with adhesives.

Yes, glue gun glue is waterproof and highly water resistant. Glue used with Bostik Hot Melt Glue Gun and Bostik Cool Melt Glue Gun is designed to provide a durable bond that can cope with moisture, varying temperatures and everyday wear..

Hot melt adhesive is a popular choice for craft, hobby and DIY projects because it provides a strong, long-lasting bond while remaining suitable for a wide range of materials and applications

Bostik Glu Dots are pressure-sensitive, double-sided, adhesive dots available in a removable or permanent formula.

Our Glu Dots can stick to almost anything including paper, wood, plastic, foam, metal, glass and painted surfaces. They're perfect for arts and crafts projects such as scrapbooking, sticking up posters to walls, card making, collages and model making at home, the office or in schools.

Bostik Tape Discs are most commonly used for parcel and gift wrapping, sealing bags and envelopes, securing tags and bows, and much more.

As they're acid and lignin-free, we also like to use these handy sticky discs in scrapbooking to secure photos in place without staining your favourite snapshots.

You can even use them for re-sealing opened food packages to ensure your contents stay fresh and you avoid accidental spills.

Bostik Blu Tack® is available in several colours, including blue, white, grey and pink. Each product provides the same reusable fixing benefits while offering different colour options to suit individual preferences and applications.

For example, Bostik Blu Tack® Grey is designed to be more discreet on darker surfaces, making it suitable for applications involving appliances, electrical devices, cables and dashboards.

All Blu Tack® variants are reusable adhesives designed for temporary fixing and mounting applications around the home, office and school.

Fast Tak Permanent spray glue is a permanent contact adhesive in an aerosol format. It applies as a mist and is suitable for bonding a wide variety of materials including paper, card, foam, leather, rubber, plastic, metal, wood, stone and even concrete.

Simple and easy-to-use in a few seconds, our Fast Tak Permanent caters to all kinds of craft and DIY needs, whether that’s craft creations, furniture repairs, clothing repairs and more.

Simply shake to wake, spray from 15 to 20 cm, allow to dry for a few seconds, line up your surfaces and press together to stick.

PVA Glue is a water-based adhesive commonly used for bonding porous materials such as wood, paper, card and fabric. It is popular for DIY, craft and woodworking projects because it is easy to apply and dries to form a strong bond.

Bostik PVA Glue is formulated using vinyl acetate homo-polymer and polyvinyl alcohol, making it a versatile adhesive for a wide range of everyday applications. 

The operating temperature of a glue gun depends on the type of glue gun being used.

Bostik Cool Melt Glue Gun operates at approximately 130°C to 150°C, making it suitable for delicate substrates, floristry and craft applications. It is designed for situations where a lower-temperature adhesive system is preferred.

Bostik Hot Melt Glue Gun operates at approximately 170°C to 190°C and is designed for heavier-duty DIY projects, repairs, hobbies and craft applications where a higher-temperature hot melt adhesive system is required.

Both systems provide fast bonding performance, with handling strength achieved in around 1 minute and full strength typically reached within 1 to 2 hours.

The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.

Bostik PVA Glue reaches full cure in approximately 12 hours on paper and card, and approximately 24 hours on wood.

Drying and curing times can vary depending on the materials being bonded and the application conditions. For best results, apply Bostik PVA Glue at temperatures above 15°C and ensure surfaces are clean and dry before use.

Bostik Blu Tack® is recommended for use on non-porous surfaces and can be used for temporary fixing applications such as displaying posters, paper, card and decorations.

Avoid using Bostik Blu Tack® on absorbent surfaces, porous brickwork, silk-screen printed wallpaper or hand-stencilled wallpaper.

For the best results, test on a small, inconspicuous area before use. Bostik Blu Tack® may leave an oily mark on some surfaces.

You can buy Bostik Blu Tack® online through the Amazon brand store or from major retailers.

You can also use the Bostik stockist finder to locate a retailer near you. Availability may vary depending on your location and the products stocked by individual retailers.

Bostik Blu Tack® Grey is designed for discreet fixing on darker surfaces. Its dark grey colour helps it blend in more easily than traditional blue adhesive, making it suitable for applications where a less visible finish is preferred.

Bostik Blu Tack® Grey can be used around appliances, electrical devices, cables and car dashboards, while providing the same reusable fixing benefits as other Blu Tack® products.

Like other members of the Blu Tack® family, it can be removed and reused, making it a practical solution for temporary fixing applications.

Blu Tack® was originally white but consumer research at the time showed concerns that children may mistake it for chewing gum, so blue colouring was added, giving it its household name.

Bostik Blu Tack® may leave an oily mark on some surfaces. Before use, test on a small, inconspicuous area, especially on decorative, delicate or valuable surfaces.

For removal, gently roll Bostik Blu Tack® off the surface. Any remaining pieces can be removed by dabbing them with another piece of Blu Tack®.

Bostik Glu Dots are acid and lignin-free and are non-toxic so they will not stain or leave a sticky residue behind when applied to fabric, walls or photos.

Yes, Bostik PVA glue can stick to leather and many fabrics, but it is best suited for light-duty or craft applications. For stronger, more flexible, and longer-lasting bonds, specialised leather glue or fabric adhesives are recommended.

Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.

Yes. Bostik PVA Glue is supplied as a liquid glue in an easy-to-use plastic bottle with a resealable cap. It is ready to apply straight from the bottle and can be used for arts and crafts projects, modelling, woodworking, school projects and other simple creative tasks.

Bostik PVA Glue is suitable for school projects and is ideal for both schools and home, but it is not described as “just school glue.” It bonds to fabric, but it is not described as the same as fabric glue. Information about leather glue is not available in the provided source. 

Bostik PVA Glue is described as a multi-purpose, solvent free white glue and as a general purpose PVA glue, but the provided source does not state that all multi-purpose glues are PVA glues. 

Swallowing Bostik Blu Tack® is not classified as hazardous based on the available safety data. If Blu Tack® is swallowed, clean the mouth with water, drink one or two glasses of water and do not induce vomiting.

If medical advice is needed, have the product packaging or label available. Never give anything by mouth to an unconscious person.

Bostik PVA Glue is a general purpose PVA glue suitable for most arts and crafts projects. As a craft PVA glue, it can be used for scrapbooks, card making, modelling, and school projects. It can also be used to make slime, create a glossy finish on projects, or be mixed with powder for finger painting. 

PVA Glue and general-purpose glue are designed for different applications. Bostik PVA Glue is a water-based adhesive that works best on porous materials such as wood, paper, card and fabric, making it popular for DIY, craft and woodworking projects.

“Normal glue” is a broad term and can refer to many different adhesive types, including instant glue, solvent-based glue, fabric glue, leather glue or multi-purpose glue. These may be designed for faster grab, stronger repairs, flexible materials or specialist surfaces. The best choice depends on what you are sticking and how the finished bond needs to perform. 

Bostik PVA Glue bonds to most craft materials, including paper, card, wood and fabric, which is why it’s commonly referred to as a multipurpose glue. 

Its versatility makes it useful for projects that combine different materials, such as card decorations, wooden models or fabric details. For best results, surfaces should be clean and dry before the glue is applied.

PVA glue is a popular choice for paper mache. Mix it with your paper pieces to help build up layers and create shapes for masks, bowls, decorations and other crafty projects.

PVA glue is often referred to as 'paste glue', which is great for everyday craft projects like paper crafts, card making, scrapbooking, collages and model making. It’s especially handy when you want an easy-to-spread adhesive for lightweight, porous materials.

Stationery glue is a common term for popular craft glues like PVA glue, glue sticks, All Purpose glue and more. Stationery glues are simple, easy-to-use adhesives for paper, card and other lightweight craft materials.

The best crafting glue depends on what you’re making. PVA glue is a great everyday choice, while glue dots are handy for neat paper crafts and scrapbooking, and a low-temperature glue gun can be useful for projects that need a quicker, stronger hold.

For most arts and crafts, PVA glue is a brilliant all-rounder. It works well for paper, card, fabric, wood and plenty of other common craft materials, making it useful for everything from collages to handmade decorations.

Yes, cool melt glue guns are a good option for crafts, floristry, DIY projects and household repairs. Bostik Cool Melt Glue Gun is designed to provide a strong bond while operating at a lower temperature, making it suitable for delicate substrates that may not be suitable for higher-temperature glue systems.

When used with Bostik Craft Cool Melt Glue Sticks, the system can bond materials including polystyrene, wood, leather, fabric and rubber.

The adhesive provides handling strength within approximately 1 minute and reaches full strength in 1 to 2 hours, making it suitable for a wide range of creative and repair applications.

Yes. Glue dots are a type of adhesive dot. Bostik Glu Dots are pressure-sensitive, double-sided adhesive dots that you simply press into place, so there’s no liquid glue to apply or wait to dry.

No. For best results, use Bostik Craft Cool Melt Glue Sticks with the Bostik Cool Melt Glue Gun. The cool melt system is designed to work with lower melting point glue sticks that operate at reduced temperatures.

Standard hot melt glue sticks are designed to operate at higher temperatures than cool melt glue sticks. Bostik Craft Cool Melt Glue Sticks are formulated for use at approximately 125°C to 135°C, while standard hot melt glue sticks typically operate at around 175°C to 200°C.

To achieve the intended performance and bonding results, use the glue sticks recommended for your glue gun system.

Carefully and very slowly peel the Glu Dot away. For projects where you know you’ll want to reposition or remove something later, choose the Removable version rather than Extra Strong.

Whether Bostik Blu Tack® can be used on wood depends on the surface. Bostik Blu Tack® is recommended for non-porous surfaces and is not suitable for absorbent surfaces.

Because wooden surfaces can vary in how porous they are, performance may differ depending on the type and finish of the wood. For best results, use Bostik Blu Tack® on suitable non-porous surfaces and always test on a small, inconspicuous area first.

Bostik Blu Tack® may also leave an oily mark on some surfaces, so care should be taken when applying it to finished or decorative materials.

Yes, clear hot glue does exist. Clear glue sticks are available for use with both the Bostik Hot Melt Glue Gun and Bostik Cool Melt Glue Gun, and refill packs are available for both systems.

Clear hot glue is a popular choice for craft and hobby projects where you want the adhesive to be less noticeable once applied. Using clear glue sticks can help create a cleaner-looking finish on a wide range of bonding applications.

Yes, many glue sticks are designed to be washable. Bostik Blu Stick is formulated to be washable, and any excess adhesive can be removed with a damp cloth.

If Bostik Blu Stick gets onto clothing, the adhesive can be washed out before it has fully set.

For the easiest clean-up, remove excess adhesive as soon as possible after application.

Once applied, how long foam pads stay stuck will depend on the surface, conditions and how the finished craft is used. Unopened Bostik Foam Pads can be stored for up to 24 months from manufacture when kept in their original packaging in dry conditions between 5°C and 25°C.

Hot melt glue sets very quickly. Bostik DIY Hot Melt Glue Sticks provide handling strength within approximately 1 minute, allowing bonded items to be carefully handled soon after application.

For maximum performance, allow the adhesive to reach full strength in 1 to 2 hours at 20°C.

When used with a Bostik Hot Melt Glue Gun, the adhesive is designed to be very fast setting, making it suitable for household repairs, DIY projects, floristry, arts and crafts.

Bostik Glu Dots provide an instant bond and come in Removable and Extra Strong versions, so you can choose the hold that best suits your craft. Removable Glu Dots are a great choice when you may want to remove them after a period of time such as temporarily sticking up party decorations. Extra Strong Glu Dots are a handy choice when you want a firmer hold for embellishments and other small craft pieces.

The best glue gun for your project depends on the type of materials you want to bond. If you work with delicate substrates, crafts or floristry projects, a Bostik Cool Melt Glue Gun is designed to operate at a lower temperature and is ideal for more sensitive materials.

For household repairs, DIY projects and more demanding bonding tasks, a Bostik Hot Melt Glue Gun provides a higher-temperature adhesive system designed for strong, fast-setting bonds.

Both systems provide handling strength within approximately 1 minute and full strength in 1 to 2 hours, so the main consideration is choosing the temperature and adhesive system that best matches your application.

To get the best stick for Blu Tack, make sure your surface is clean, dry and free from dust or grease. Tear off the amount you need, then pull and stretch the Blu Tack until it’s soft and supple. The more you handle the product, the stickier and more pliable it becomes. Then, roll it into a ball, place it between the surfaces and press firmly.

To use a cool melt glue gun, insert a Bostik Craft Cool Melt Glue Stick into the back of the Bostik Cool Melt Glue Gun and allow the gun to heat up for approximately 5 to 10 minutes.

Once heated, use the trigger to apply the molten adhesive to the material and join the surfaces while the glue is still workable. The adhesive provides handling strength within approximately 1 minute and reaches full strength in 1 to 2 hours at 20°C.

The system is suitable for crafts, floristry, DIY projects and household repairs and can be used on materials including polystyrene, wood, leather, fabric and rubber.

To use Bostik Tape Discs, firstly make sure your surface is clean, dry and dust-free, then simply peel a Tape Disc from the clear backing and press it firmly into place. For a more transparent finish on paper, run your fingernail over the disc once it’s stuck down. Try not to touch the sticky side, as this can make it less adhesive. They’re a handy, scissors-free option for wrapping gifts, fixing ribbons and tags, and sealing bags or envelopes.

Start with clean, dry surfaces. Peel a foam pad from the sheet and press it onto your first piece, then remove the paper backing and press your second piece firmly on top. You can even layer pads together if you want to create a bigger 3D effect.

When using clear adhesive dots, make sure your surfaces are clean, dry and dust-free. Peel back the release paper to reveal the glue dot, press it firmly onto your embellishment or craft piece, then carefully remove the clear backing and press your piece into position. When you’re ready to remove it, peel it away carefully and very slowly.

Bostik Blu Tack® is the original reusable adhesive and is commonly used for many of the same applications as adhesive putty, including holding up posters, paper, card and decorations. It can also be used as an alternative to drawing pins and sticky tape.

Blu Tack® can be removed and reused again and again, making it a practical solution for temporary fixing and mounting around the home, office and school.

Yes - Bostik Blu Tack is suitable for children as it is non-toxic, solvent-free and easy-to-use. However, it is important to keep out of reach of very small children as it can be a choking hazard.

Bostik Blu Tack® is designed for use around the home, office and school. As the original reusable adhesive, it can be used for temporary fixing applications such as displaying posters, paper, card and decorations. 

Bostik Blu Tack® is clean, easy to use and can be removed and reused again and again, making it a practical alternative to drawing pins and sticky tape.

Yes - clear tape and transparent tape generally mean the same thing. They are see-through adhesive tapes that gives you a neat, discreet finish, making it a handy addition to any craft box. Bostik Sticky Tape is a clear, easy-tear adhesive tape with strong, clean adhesion.

No, a glue stick is not typically waterproof. Bostik Blu Stick has poor water resistance, so it is best suited to paper, card and other craft applications that are not exposed to significant moisture.

Bostik Blu Stick is designed as a washable, solvent-free adhesive for use on most paper-based materials, including card, tissue paper, crepe paper and photographs.

If your project is likely to be exposed to water or damp conditions, a glue stick may not be the most suitable adhesive choice

Yes, hot melt glue and hot glue are commonly used to describe the same type of adhesive used in glue guns. Bostik DIY Hot Melt Glue Sticks are hot melt adhesives that are heated in a glue gun, applied in a molten state and then quickly set as they cool.

Hot melt adhesives are widely used for household repairs, DIY projects, floristry, arts and crafts because they provide fast-setting bonds on a range of materials.

When used with a compatible glue gun, Bostik DIY Hot Melt Glue Sticks provide handling strength within approximately 1 minute and reach full strength within 1 to 2 hours at 20°C.

Foam pads are perfect for adding dimension and raised 3D effects to your crafts. They’re particularly handy for card making, scrapbooking, decoupage, collages and model making, and can stick to flat surfaces including paper, wood, fabric and plastic.

Bostik Blu Tack® can be used for a wide range of temporary fixing and mounting tasks around the home, office and school. As the original reusable adhesive, it provides an alternative to drawing pins and sticky tape.

Common uses for Bostik Blu Tack® include:

• Holding up posters, paper and card 
• Displaying party decorations 
• Holding photos in albums 
• Securing lightweight objects to desks and shelves 
• Holding screws in place on screwdrivers during DIY tasks Bostik 

Blu Tack® can be removed and reused again and again, making it a practical solution for temporary fixing applications.

Glue stick adhesive can usually be removed while it is still fresh. Bostik Blu Stick is formulated to be washable, and excess adhesive can be wiped away with a damp cloth.

If Bostik Blu Stick gets onto clothing, it can be washed out before the adhesive has fully set.

For the easiest removal, clean away excess adhesive as soon as possible after application.

Spray glue is brilliant for covering larger areas quickly and evenly, making it handy for crafts, presentations and creative projects. Bostik Fast Tak Permanent Spray can bond materials including paper, card, fabric, canvas, wood, leather, cork, rubber and some plastics, so it’s a versatile choice when a glue stick or liquid glue isn’t practical.

A cool melt glue gun is used for bonding materials in craft projects, floristry, DIY tasks and household repairs. Bostik Cool Melt Glue Gun operates at a lower temperature than a standard hot melt glue gun, making it suitable for use on delicate substrates.

When used with Bostik Craft Cool Melt Glue Sticks, it can bond materials including polystyrene, wood, leather, fabric and rubber.

Bostik Cool Melt Glue Gun provides handling strength within approximately one minute and reaches full strength within one to two hours at 20°C.

A glue stick is a solid adhesive that can be applied directly to a surface without dripping or creating excess mess. Glue sticks are commonly used for paper crafts, school projects, card making, scrapbooking, collages and sticking photographs.

Bostik Blu Stick is a solvent-free glue stick designed for most paper-based materials, including card, tissue paper, crepe paper and photographs. It goes on blue so you can see where it has been applied, then dries clear for a neat finish.

Bostik Blu Stick is also washable, making it a practical choice for use at home and in schools.

Hot melt glue is commonly used for household repairs, DIY projects, arts and crafts, and floristry. When used with a glue gun, Bostik DIY Hot Melt Glue Sticks provide a fast-setting adhesive solution for a wide range of bonding tasks.

Hot melt glue can bond materials including wood, leather, fabric, rubber and polystyrene, making it suitable for both creative and practical applications.

The adhesive sets quickly, providing handling strength within approximately 1 minute and reaching full strength in 1 to 2 hours at 20°C.

The main difference between a hot melt glue gun and a cool melt glue gun is the operating temperature. Bostik Cool Melt Glue Gun operates at a lower temperature of approximately 130°C to 150°C, making it ideal for delicate substrates, crafts and floristry applications.

Bostik Hot Melt Glue Gun operates at a higher temperature of approximately 170°C to 190°C and is designed for heavier-duty DIY projects, repairs, hobbies and craft applications where a stronger hot melt adhesive system is required.

Both systems provide fast bonding performance, with handling strength within around 1 minute and full strength in 1 to 2 hours.

For delicate materials such as polystyrene, a cool melt system is generally the more suitable option, while a hot melt system is often preferred for more demanding DIY and repair tasks.

Bostik's standard transparent tape, Sticky Tape, is a versatile choice for everyday crafts, wrapping and paper projects. You can use it for sticking paper and card, wrapping gifts and plenty of other creative jobs where you want a quick, clean bond without your tape standing out.

There is also Bostik Max Repair Tape in clear which is a transparent duct tape. It is an exceptionally strong, versatile, waterproof repair tape that is designed to deliver unmatched adhesion on a wide range of materials including wood, metal, stone, plastic, rubber, leather, and more, making it perfect for even the most demanding repairs.

Bostik Blu Tack® works best on non-porous surfaces. As the original reusable adhesive, it is designed for temporary fixing and mounting applications such as displaying posters, paper, card and decorations.

Bostik Blu Tack® is not suitable for absorbent surfaces, porous brickwork, silk-screen printed wallpaper or hand-stencilled wallpaper.

For the best results, use Bostik Blu Tack® on suitable non-porous surfaces and test on a small, inconspicuous area before application. Bostik Blu Tack® may leave an oily mark on some surfaces.

The best spray adhesive depends on what you’re making. For craft projects where you want a strong, permanent bond, Bostik Fast Tak Permanent Spray is a versatile option. It offers a quick initial grab and works across lots of popular craft materials, including paper, card, fabric, canvas, wood, leather and cork. For more heavy duty, DIY projects the EVO-STIK Impact Adhesive Spray is a good option.

There is no single glue gun wattage that is best for every craft project. The right choice depends on the materials you are using, the size of the project and the temperature required for the application.

Bostik Hot Melt Glue Gun operates from 25W to 85W and is suitable for crafts, hobbies and a wide range of household projects.

Bostik Cool Melt Glue Gun operates from 7W to 55W and is suitable for delicate substrates, floristry and craft applications where a lower-temperature adhesive system is preferred.

For most craft projects, choosing the right glue gun type is more important than focusing on wattage alone.

Yes. Glue dots are a quick, mess-free way to stick smaller items to your crafts. Bostik Glu Dots give an instant, double-sided bond and are ideal for card making, scrapbooking, collages and model making. They’re especially handy for precisely placing sequins, beads, rhinestones and other embellishments.

Bostik Blu Stick goes on blue so you can see exactly where the adhesive has been applied. This helps improve application accuracy when sticking paper, card, photographs and other paper-based materials.

The blue colour is only temporary. Once dry, Bostik Blu Stick dries clear, helping to create a neat finish without visible blue marks.

To remove Bostik Blu Tack® from a wall, gently roll the adhesive away from the surface. Any remaining pieces can often be removed by dabbing them with another piece of Blu Tack®.

Because wall surfaces and finishes can vary, the best removal method for any remaining marks or stains will depend on the wall type. For detailed step-by-step guidance, see our guide How to remove Blu Tack® stains from a wall, which explains how to deal with Blu Tack® marks on walls safely and effectively.

If Bostik Blu Tack® gets onto clothing, carefully remove as much of the adhesive as possible. Blu Tack® can often be lifted away by gently rolling it off, while any remaining pieces can be removed using another piece of Blu Tack®.

If adhesive residue remains on the fabric, follow the garment care instructions and use an appropriate cleaning method for the material.

Yes, Bostik Blu Tack® can be reused. As the original reusable adhesive, it can be removed and used again and again for a wide range of temporary fixing and mounting applications.

After removal, simply remould the adhesive and reuse it where needed. Bostik Blu Tack® is commonly used for holding up posters, paper, card and decorations, as well as securing lightweight items around the home, office and school.

Its adhesive properties also increase over time, helping it remain an effective reusable fixing solution.

Glue guns can be used on a wide range of household materials, but the most suitable glue gun depends on the material being bonded.

Bostik Craft Cool Melt Glue Gun can bond materials including polystyrene, wood, leather, fabric and rubber. Its lower operating temperature of 130°C to 150°C makes it particularly suitable for delicate substrates, floristry and craft applications.

Bostik Hot Melt Glue Gun can bond materials including ceramics, wood, leather, fabric and metal. Operating at 170°C to 190°C, it is designed for household repairs, hobbies and more demanding DIY applications.

Both systems provide fast bonding performance, with handling strength achieved in around 1 minute and full strength typically reached within 1 to 2 hours.

Yes, a glue gun can be used on fabric. Both Bostik Craft Cool Melt Glue Gun and Bostik Hot Melt Glue Gun can bond fabric when used with the appropriate Bostik glue sticks.

Bostik Craft Cool Melt Glue Gun is designed for delicate substrates, floristry and craft projects and operates at a lower temperature of approximately 130°C to 150°C. This makes it a suitable choice for fabric-based craft applications where a lower-temperature adhesive system is preferred.

Bostik Hot Melt Glue Gun operates at approximately 170°C to 190°C and is designed for household repairs, hobbies and craft projects where a higher-temperature adhesive system is required.

Both systems provide fast bonding performance, achieving handling strength within approximately 1 minute and full strength within 1 to 2 hours.