BLU TACK® PINK
The original reusable adhesive tack - in pink
Pink
Features & benefits
Blu Tack® Pink is the pink coloured version of the nation’s favourite reusable adhesive – perfect for arts and crafts.
It’s designed specifically for those who require an adhesive putty that's bright and colourful to stand out in creative projects.
Whether you're at home, in the office, at school, or out and about, Bostik Blu Tack® Pink has over a thousand uses, or #BluHacks. It’s suitable for traditional uses such as sticking up posters and signs, as well as alternative uses such as a colourful pencil grip and more.
For poster displays where the adhesive may be on show, our pink adhesive tack is perfect for adding a pop of colour to the wall. What do you do with yours? - Share today
An ideal alternative to sticky tape or drawing pins
Over a thousand uses or #BluHacks
Blu Tack® Pink is perfect for those wanting a colourful adhesive
Clean, safe and easy-to-use
Instant, repositionable bond
Non-toxic & solvent-free
Packaging made from recycled card
Tried and tested formulation - made in Britain for over 50 years
Technical information
Bostik DIY United Kingdom Create - Blu Tack Pink Technical Data Sheet (399.32 KB)
This file is stored on an external website, please follow the link
Watch video
How to use
Blu Tack® Pink performs best on non-porous surfaces e.g. painted surfaces, glass, metal etc. Do not use on recently decorated surfaces or absorbent, silk-screen printed or hand stencilled wallpaper.
- Ensure surfaces to which Bostik Blu Tack® Pink is to be applied are clean, dry and free from dust, grease and loose surface material.
- Pull off a piece of pink adhesive tack and activate it by pulling and stretching.
- Roll into a ball, place between the two surfaces and press firmly.
How to remove Blu Tack® Pink
- Remove Blu Tack® Pink by rolling it carefully off the surface. It can then be used again and again.
- Any remaining shreds can be removed by gently rolling the pink adhesive tack on the wall or dabbing a new blob of Blu Tack® Pink over the surfaces.
The adhesive properties of Bostik Blu Tack® Pink increase over time, so take extra care when removing it after a period of months.
Related tutorials
How to create reverse prints using Blu Tack®
How to remove Blu Tack® from carpet
How to remove Blu Tack® stains from a wall
18 DIY #BluHacks using Blu Tack® Grey
Easy mermaid craft using wooden clothes pegs
How to create a squirrel and hedgehog leaf craft
Make your own tote bag using DIY stamps
#BluHacks around the school or office
FAQs
Where can I buy Blu Tack®?
Buy Blu Tack® online through our Amazon brand store or via any major retailer. See our list of stockists
What colours does Blu Tack® come in?
Bostik Blu Tack® is available in four colours: original blue, pink, white and grey.
How much weight can Blu Tack® hold?
0.5 grams of Blu Tack® will hold an approximate 105 gram load, but Bostik Blu Tack® is not designed to hold heavy objects.
What surfaces can I use Blu Tack® on?
Blu Tack® performs best on non-porous surfaces e.g. painted surfaces, glass, metal etc. Do not use on recently decorated surfaces or absorbent, silk-screen printed or hand stencilled wallpaper.
How to remove Blu Tack® from carpet?
Blu Tack® sometimes gets dropped and pressed into the carpet. You can easily remove it by firstly, removing as much as possible by hand. Then, grab an additional piece of Blu Tack® and press it into the Blu Tack® in the carpet and pull it away to remove as much as possible.
If there are remaining pieces, wrap parcel tape - sticky side outwards - around your knuckles and knead into the affected area. Finally, use a fine-tooth comb to remove the last little bits!
Will Blu Tack® leave a stain?
On some surfaces, after a long period of time, Blu Tack® can leave a slight oily mark. This can be removed using removers like citrus oils and lighter fuel but as per the guidance of the suppliers. Before using these products, we recommend you test on a small inconspicuous area.
Is swallowing Blu Tack® dangerous?
Blu Tack® is a non-toxic, non-harmful substance and will not cause any problems if swallowed, only mild discomfort. If any discomfort experienced continues, we recommend seeking medical advice.
Can you use Blu Tack on wood?
Whether or not Blu Tack can be used on wood, depends on the finish of the wood. Bostik recommends Blu Tack for non-porous surfaces, so it may not be suitable for unfinished or absorbent wood. If you’re unsure, test it on a small, hidden area first, as Blu Tack can sometimes leave an oily mark on certain surfaces.
How to make Blu Tack really sticky?
To get the best stick for Blu Tack, make sure your surface is clean, dry and free from dust or grease. Tear off the amount you need, then pull and stretch the Blu Tack until it’s soft and supple. The more you handle the product, the stickier and more pliable it becomes. Then, roll it into a ball, place it between the surfaces and press firmly.
Is adhesive putty the same as Blu Tack?
Blu Tack is a type of reusable adhesive putty. Bostik Blu Tack is the original reusable adhesive, designed as a clean and easy alternative to drawing pins or sticky tape.
Is Blu Tack suitable for kids?
Yes - Bostik Blu Tack is suitable for children as it is non-toxic, solvent-free and easy-to-use. Its perfect for use around the home, office and school. However, it is important to keep out of reach of very small children as it can be a choking hazard.
What can you use Blu Tack for?
Blu Tack has over a thousand uses around the home, school and craft space. Try it for putting up posters, cards and party decorations, adding photos to albums or temporarily holding lightweight objects in place.
What surfaces does Blu Tack work best on?
Blu Tack is recommended for non-porous surfaces that are clean, dry and free from dust and grease. Avoid using it on absorbent surfaces, porous brickwork, or silk-screen printed or hand-stencilled wallpaper.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER