Bond

• Clean bonding surfaces thoroughly. Remove any trace of water, oil, grease, dust and other impurities.
• Apply even coats of Rugby Excel on both surfaces. For porous materials like wood, fabric, canvas, leather, foam, concrete, etc., apply second coat over the first coat.
• Allow surface to dry for 20–30 minutes. Avoid excessive drying.
• Join the materials together, ensuring parts are properly aligned before pressing. Press parts by applying a uniform pressure by hand or mechanical pressure such as rollers or hammer.

• Clean bonding surfaces thoroughly. Remove any trace of water, oil, grease, dust and other impurities.
• Apply even coats of Rugby Contact Cement on both surfaces. Application thickness may vary according to the porosity of substrates. Allow surface to dry for 20–30 minutes. Avoid excessive drying.
• Join the materials together, ensuring parts are properly aligned before pressing. Press parts by applying a uniform pressure by hand or mechanical pressure such as rollers or hammer.

Rugby Excel may be removed with suitable solvent cleaner immediately before the glue dries.

Rugby Original may be removed with suitable solvent cleaner immediately before the glue dries.

Keep Rugby Excel containers tightly closed after use. Keep away from electrical and other ignition sources.

Keep Rugby Original containers tightly closed after use. Keep away from electrical and other ignition sources.

The drying time of El Heneral is 3 hours.

The full curing time of El Heneral is 3 days.

El Heneral is used for the for the following:

• Bonding old to new concrete
• Dowelling of metal to concrete
• Bonding joints between various material like concrete, metal, wood, glass, ceramics and porcelain
• Other structural applications where parts are subject to heavy load

El Kapitan is used for the for bonding and finishing of:

• Marine plywood
• Wooden boat
• Woodcraft
• Construction
• Ceramics
• Furmiture

El Supremo is used for the for the following:

• Bonding old to new concrete
• Dowelling of metal to concrete
• Bonding joints between various material like concrete, metal, wood, glass, ceramics and porcelain
• Other structural applications where parts are subject to heavy load

• As a contact adhesive for installation of wall and floor panels
• Most bonding applications where high strength, gap filling, one component adhesive is required
• Timber, metal, cementitious and plaster sheets to timber or metal studs
• Installation of battens or other fixings to brick, masonry or concrete walls
• General-purpose construction adhesive
• Suitable to use on foamed polystyrene
• Ideal for mirror backed tiles

• If working in an area with poor ventilation or in a confined area, we recommend a mask be worn.
• Avoid contact with skin, eyes and avoid breathing in vapour.
• If swallowed contact doctor. If skin contact occurs, wipe off excess and remove contaminated clothing. Wash affected area thoroughly with soap and water.

Rugby Excel is used for bonding of rubber, leather, leatherette, rubber foam, metal, canvas, and plywood to similar or dissimilar materials.

Rugby Original is used for bonding of rubber, leather, leatherette, rubber foam, metal, canvas, and plywood to similar or dissimilar materials.

Rugby Excel has a shelf life of 12 months.

Rugby Original has a shelf life of 12 months.

5-10 minutes depending on the temperature

1. Ensure surfaces are clean; dry free from grease and loose materials.
2. For best results, surfaces and surroundings should be pleasantly warm.
3. Take out a sheet of dots from the wallet.
4. Fold and then tear off, along the perforations, to remove as many dots as required.

Bostik Fabric Glue forms a permanent bond by adhering to the fibres of the fabric.

Bostik Fabric Glue may feel dry to the touch in a relatively short time, but we recommend allowing around 24 hours for the adhesive to fully cure. This helps ensure the bond reaches its maximum strength before the fabric is worn, washed or handled extensively.

Drying times can vary depending on the fabric type, the amount of adhesive applied and the surrounding temperature and humidity.

Yes, Bostik Fabric Glue is machine-washable so is perfect for clothing repairs and can withstand everyday wear and tear.

Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of days due to general wear and tear and the natural oils in the skin. If skin irritation occurs, consult a doctor.

Yes, Bostik Fabric Glue can help reduce fraying by securing loose fibres along the edge of the fabric. The flexible bond helps keep the material intact while maintaining the fabric's appearance.

This makes Bostik Fabric Glue a useful choice for fabric repairs, alterations and craft projects where preventing frayed edges is important.