How do I prepare the surfaces to be glued?
Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.
How do I remove glue from my fingers?
Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of days due to general wear and tear and the natural oils in the skin. If skin irritation occurs, consult a doctor.
How do I store Super Glue?
We recommend storing in a refrigerator to lengthen the shelf life. Refrigerated packaging should be allowed to return to room temperature prior to use.
How do I clean Super Glue from a surface?
Wipe the affected area with an acetone dampened cloth or nail polish remover containing acetone.
What are the recommended uses of No More Nails?
- As a contact adhesive for installation of wall and floor panels
- Most bonding applications where high strength, gap filling, one component adhesive is required
- Timber, metal, cementitious and plaster sheets to timber or metal studs
- Installation of battens or other fixings to brick, masonry or concrete walls
- General-purpose construction adhesive
- Suitable to use on foamed polystyrene
- Ideal for mirror backed tiles
What is the working time (initial contact) of No More Nails?
5-10 minutes depending on the temperature
What is the open time (reposition)?
20-30 minutes depending on the temperature
How long is the maximum bond?
12-72 hours depending on the temperature and thickness
What are the safety tips when using No More Nails?
- If working in an area with poor ventilation or in a confined area, we recommend a mask be worn.
- Avoid contact with skin, eyes and avoid breathing in vapour.
- If swallowed contact doctor. If skin contact occurs, wipe off excess and remove contaminated clothing. Wash affected area thoroughly with soap and water.
Can you buy Blu Tack® in different colours?
Blu Tack® is also available in a 5 colour pack - pink, green, blue, yellow & orange. It is also available in its original color of blue.
How much weight can Blu Tack® hold?
0.5 grams of Blu Tack® will hold an approximate 105 gram load, but Blu Tack® is not designed to hold heavy objects.
Is swallowing Blu Tack® dangerous?
Blu Tack® is a non-toxic, non-harmful substance and will not cause any problems if swallowed, only mild discomfort. If any discomfort experienced continues, we recommend seeking medical advice.
What age range is Blu Tack® suitable for?
Blu Tack® is great for both children and adults, however we advise not giving it to children under the age of three.
What surfaces can Blu Tack® stick to?
Blu Tack® can be used on non-porous surfaces such as glass, metal and plastic, as well as painted surfaces and vinyl coated wallpaper.
When will Blu Tack® stick best?
Surfaces must be clean and dry, and free from grease or loose materials to work best. If a room or surface conditions are too hot (over 70°C), Blu Tack® will soften and become more difficult to secure items in place.
Where is best place to store Blu Tack®?
Pop it in a tightly closed container in a dry, cool and well-ventilated location.
Will Blu Tack® leave a stain?
On some surfaces, after a long period of time, Blu Tack® can leave a slight oily mark. This can be removed using removers like citrus oils and desolvers, but as per the guidance of the suppliers. Before using these products, we recommend you test on a small inconspicuous area.
What are the recommended uses of El Kapitan?
El Kapitan is used for the for bonding and finishing of:
- Marine plywood
- Wooden boat
- Woodcraft
- Construction
- Ceramics
- Furmiture
What is the mixing ratio?
1 part A, 1 part B
How long is the setting time?
1 to 1 1/2 hours
How long is the drying time?
3 hours
How long is the full curing time?
36-72 hours
What is the pot life of A&B mixture?
1 hour
What are the recommended uses of El Heneral?
El Heneral is used for the for the following:
- Bonding old to new concrete
- Dowelling of metal to concrete
- Bonding joints between various material like concrete, metal, wood, glass, ceramics and porcelain
- Other structural applications where parts are subject to heavy load
How long is the drying time?
3 hours
How long is the full curing time?
3 days
What are the recommended uses of El Supremo?
El Supremo is used for the for the following:
- Bonding old to new concrete
- Dowelling of metal to concrete
- Bonding joints between various material like concrete, metal, wood, glass, ceramics and porcelain
- Other structural applications where parts are subject to heavy load
What is Rugby Excel used for?
Rugby Excel is used for bonding of rubber, leather, leatherette, rubber foam, metal, canvas, and plywood to similar or dissimilar materials.
How do I apply Rugby Excel?
- Clean bonding surfaces thoroughly. Remove any trace of water, oil, grease, dust and other impurities.
- Apply even coats of Rugby Excel on both surfaces. For porous materials like wood, fabric, canvas, leather, foam, concrete, etc., apply second coat over the first coat.
- Allow surface to dry for 20–30 minutes. Avoid excessive drying.
- Join the materials together, ensuring parts are properly aligned before pressing. Press parts by applying a uniform pressure by hand or mechanical pressure such as rollers or hammer.
How do I clean up excess Rugby Excel?
Excess adhesives may be removed with suitable solvent cleaner immediately before the glue dries.
What is the shelf life of Rugby Excel?
Rugby Excel has a shelf life of 12 months.
How do you store Rugby Excel?
Keep containers tightly closed after use. Keep away from electrical and other ignition sources.
What is Rugby Original used for?
Rugby Original is used for bonding of rubber, leather, leatherette, rubber foam, metal, canvas, and plywood to similar or dissimilar materials.
How do I apply Rugby Original?
- Clean bonding surfaces thoroughly. Remove any trace of water, oil, grease, dust and other impurities.
- Apply even coats of Rugby Contact Cement on both surfaces. Application thickness may vary according to the porosity of substrates. Allow surface to dry for 20–30 minutes. Avoid excessive drying.
- Join the materials together, ensuring parts are properly aligned before pressing. Press parts by applying a uniform pressure by hand or mechanical pressure such as rollers or hammer.
How do I clean up excess Rugby Original?
Excess adhesives may be removed with suitable solvent cleaner immediately before the glue dries.
What is the shelf life of Rugby Original?
Rugby Excel has a shelf life of 12 months.
How do you store Rugby Original?
Keep containers tightly closed after use. Keep away from electrical and other ignition sources.
What are the safety tips I need to remember?
Rugby Contact Cement contains flammable solvent mixtures. Before application, eliminate all possible sources of flames or sparks. Use only in areas with adequate ventilation to avoid excessive inhalation of vapors.
What are the recommended uses of Glu Dots?
Bostik Glu Dots Removable are ideal for arts & craft, scrapbooking, card marking, collages and model making. Bostik Glu Dots Removable are the perfect size to allow for precise and accurate placing of small objects such as sequins, beads, rhinestones, wiggly eyes and many other craft embellishments. Bostik Glu Dots Removable stick to almost anything, including paper, wood, plastic, metal and glass.
How do I prepare the surfaces to be glued?
- Ensure surfaces are clean; dry free from grease and loose materials.
- For best results, surfaces and surroundings should be pleasantly warm.
- Take out a sheet of dots from the wallet.
- Fold and then tear off, along the perforations, to remove as many dots as required.
How do I apply Glu Dots?
- Peel off the printed release paper to reveal a Glu Dot left on the clear backing. The Glu Dot is now ready for use.
- Press the Glu Dot firmly onto the item to be bonded and then slowly and carefully peel off the clear backing.
- The Glu Dot will be adhered to the item, which can now be bonded to the other surface.
How do I clean up Glu Dots?
Carefully and very slowly peel away. As the adhesive gets stronger with time, it is recommended that the dots are removed by carefully rubbing and rolling them off the surface.
What is the shelf life of Glu Dots?
24 months, unopened, from date of manufacture. Store in dry conditions between +5⁰ C and +25⁰ C