SUPER GLUE LIQUID
Multi-purpose liquid super glue
Bostik Super Glue Liquid is a medium viscosity, modified ethyl-based cyanoacrylate which bonds almost immediately on contact. It has hundreds of uses for the home and office.
- Ultra strong, fast setting
- Water & heat resistant
- Safer formulation, odourless and solvent-free
- Slightly flexible so It resists knocks & drops
Super Glue Liquid works well on both porous and non-porous materials, and also works on more materials than the regular super glues. It's ideal for:
- China
- Rubber
- Metal
- Ceramics
- Jewellery
- Most plastics
After a thicker glue for vertical repairs? Try Super Glue Gel
Clear
Documents and Resources
HOW TO USE SUPER GLUE LIQUID
APPLICATION
Ensure all surfaces that will be in contact with the sealant are clean, dry, and free of dust, dirt, rust, oil, and other contaminants. Wear protective gloves and eye protection.
- First use: screw the nozzle onto the tube and remove the cap to use.
- Very carefully apply a small amount of glue to one surface only.
- Bring the surface together and hold firmly for approximately 30 seconds.
- Allow 24 hours for full cure
Always replace cap after use, and store in a cool, dry place out of direct sunlight.
FAQ
Learn how to remove super glue by watching our handy video here: HOW TO REMOVE SUPERGLUE FROM YOUR FINGERS
Viscosity is the measure of a fluid's resistance to flow. The higher the viscosity of a liquid, the thicker it is and the greater the resistance to flow.
Glue can be various measures of viscosity, with each measure having it's own benefits based on the application required. Low viscosity glue will spread easily, whereas high viscosity glue is ideal for vertical surfaces or areas that need a concentrated application.
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.