HG3 HOT MELT GLUE GUN

Electric trigger-action glue gun

Features & benefits

Bostik HG3 Hot Melt Glue Gun is an electric gun that provides an instant, clean and versatile stick when crafting or performing light household repairs.

Bostik HG3 Hot Melt Glue Sticks also available. 

  • Easy to use trigger action
  • Bonds to most materials in 60 seconds
  • Designed for Bostik HG3 Glue Sticks
  • Rated 4110 - 240volts, 50/60Hz 
  • 55 watts with working temperature of 193°C
  • Retractable stand and fitted plug"

Downloads & resources

Bostik DIY Australia Repair- HG3 Hot Glue Gun Technical Data Sheet (325.6 KB)

Bostik DIY Australia Repair - HG3 Glue Gun Safety Data Sheet (389.63 KB)

How to use

Preparation

Fit the metal stand onto the front of the hot melt glue gun in the slots by the nozzle. Load a Bostik HG3 Hot Melt Glue Stick through the grip ring at the rear of the gun and press the trigger several times until the stick is positioned firmly in the gun.

Plug in the gun and a light will come on at the rear to indicate that it is in operation. Then, rest the gun on its stand and allow to warm up for approximately 5 minutes. Ensure surfaces to be bonded are clean and dry.

Application

Press the trigger until adhesive flows from the nozzle. To ensure a continuous flow of glue, insert further glue sticks into the rear of the gun and wait a few minutes until the stick has heated to the correct temperature. DO NOT FORCE THE TRIGGER.

Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of a clamp or other holding device is not necessary.

Unplug the hot melt gun when finished and allow to cool before storing. Surplus glue stick may be trimmed off using a sharp knife. Do not pull glue sticks from the back of the gun as damage may occur.

How to remove

The adhesive can only be removed mechanically once cured by scraping carefully with a blade edge.

A residual thin film will remain, which can then be removed using a solvent cleaner.

Sensitive surfaces may be damaged by the hot adhesive or by the solvents used in the cleaning process. Always carry out a test before attempting removal.

Find new, smarter ways of doing things.

gecko.png

Find out what product you need, how to use it and where to buy it.

PRODUCT FINDER