MEDIUM FOAM PADS
Bostik Medium Foam Pads are square, double-sided sticky foam pads - ideal for creating 3D effects in craft projects.
Acid and lignin-free, the medium foam sticky pads offer a no mess solution with an easy-to-use peel technique. Suitable for most flat surfaces including wood, paper, fabric, plastic and more.
Ideal for card making, paper crafts, model making, scrapbooks and much more.
- Contains 50 square medium foam pads (12mm x 12mm)
- No mess, easy-to-use
- Acid and lignin-free
- Suitable for use on wood, paper, fabric and plastic
- Instant stick - no need to wait for them to dry
- UKCA and CE approved
White






Documents or Resources
Technical Data Sheet
Safety Data Sheet
This file is stored on an external website, please follow the link
DownloadHOW TO USE
Bostik Medium Foam Pads can be used for any of your crafting needs to create 3D effects in your projects. They are our largest foam pads in the range and are most popular for transforming flat 2D cards to become 3D.
To apply:
- Gently peel a pad off the sheet
- Press one side of the sticky pad to the first surface
- Remove the paper backing
- Stick the second surface to the foam pad
Note: Be careful not to touch the double-sided sticky pad once the paper backing is removed as it might make it less sticky.
How to remove Medium Foam Pads
To remove your double-sided sticky pads, you must carefully and very slowly peel away the pad from the surface it was applied to.
The adhesive properties of your Medium Foam Pads can increase over time so take extra care when removing.
FREQUENTLY ASKED QUESTIONS
What is the shelf life of the adhesive I have bought and where can I store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.