Decorate

Blu Tack® is also available in a 5 colour pack - pink, green, blue, yellow & orange. It is also available in its original color of blue.

1. Peel off the printed release paper to reveal a Glu Dot left on the clear backing. The Glu Dot is now ready for use.
2. Press the Glu Dot firmly onto the item to be bonded and then slowly and carefully peel off the clear backing.
3. The Glu Dot will be adhered to the item, which can now be bonded to the other surface.

Carefully and very slowly peel away. As the adhesive gets stronger with time, it is recommended that the dots are removed by carefully rubbing and rolling them off the surface.

Eighteen (18) months when stored off the ground in a cool, dry weatherproof environment.

0.5 grams of Blu Tack® will hold an approximate 105 gram load, but Blu Tack® is not designed to hold heavy objects.

Blu Tack® is a non-toxic, non-harmful substance and will not cause any problems if swallowed, only mild discomfort. If any discomfort experienced continues, we recommend seeking medical advice.

Blu Tack® is great for both children and adults, however we advise not giving it to children under the age of three.

• All types, sizes, & application of ceramic tiles 
• Fully vitrified tiles (e.g. porcelain, mosaic etc.) applied vertically up to 30cm x 30cm in size 
• Will give extra strength, better non-sag property & improve deformation if Bostik POWERFIX is added

Bostik Glu Dots Removable are ideal for arts & craft, scrapbooking, card marking, collages and model making. Bostik Glu Dots Removable are the perfect size to allow for precise and accurate placing of small objects such as sequins, beads, rhinestones, wiggly eyes and many other craft embellishments. Bostik Glu Dots Removable stick to almost anything, including paper, wood, plastic, metal and glass.

• For EXTERIOR and INTERIOR plastered concrete applications. (Surface of walls, ceilings, beams and columns)
• For pre-cast and poured concrete

FIXALL Standard Tile Adhesive (Bulilit) is a high-quality cement-based tile adhesive with superior workability. Used for thick and thin bed applications, it is ideal for ceramic tiles of all types and sizes as well as some porcelain tiles. (see performance table below).

24 months, unopened, from date of manufacture. Store in dry conditions between +5⁰ C and +25⁰ C

Twelve (12) months from date of manufacture when stored off the ground in a cool, dry weather-proof environment

ULTRAFINO Skimcoat (Bulilit) is a cement-based powder for thin plastering applications. When mixed with water, the smooth creamy consistency makes it easy to correct surface imperfections prior to painting.

Blu Tack® can be used on non-porous surfaces such as glass, metal and plastic, as well as painted surfaces and vinyl coated wallpaper.

Surfaces must be clean and dry, and free from grease or loose materials to work best. If a room or surface conditions are too hot (over 70°C), Blu Tack® will soften and become more difficult to secure items in place.

Pop it in a tightly closed container in a dry, cool and well-ventilated location.

On some surfaces, after a long period of time, Blu Tack® can leave a slight oily mark. This can be removed using removers like citrus oils and desolvers, but as per the guidance of the suppliers. Before using these products, we recommend you test on a small inconspicuous area.