• Product


For repairs to hard plastics

Product overview

Bostik Hard Plastics glue is an ultra strong, quick drying, clear adhesive. It's perfect for tough repairs on most hard and clear rigid plastics including PVC-U, ABS and High Polystyrene, as well as other materials.

  • Bonds most hard plastics including PVC-U, ABS and High Polystyrene
  • Ultra strong, long lasting, and fast setting bond
  • Water resistant
  • Available in a 20ml tube

Bostik Soft Plastics Clear Glue (20ml) also available.



20ml tube

Bostik DIY United Kingdom Badge Easy to apply
Bostik DIY United Kingdom Badge Strong bond
Strong bond
Bostik DIY United Kingdom Badge Dries clear
Dries clear
Bostik DIY United Kingdom Badge Ultra strong
Ultra strong
Bostik DIY United Kingdom Badge Instant bond
Instant bond

Documents or Resources


For best results, ensure surfaces are dry, clean and free from dust and grease

  1. Spread an even film of Hard Plastics Clear Glue onto both surfaces
  2. Leave until almost dry (about 1 minute) then press both surfaces together firmly until bonded
  3. Replace cap immediately after use to prevent the adhesive becoming unusable
  4. Maximum bond strength is achieved after approximately 12 hours


How do I prepare the surfaces to be glued?

Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.

What is the shelf life of the adhesive I have bought and where can I store it?

The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.