SOFT PLASTICS ADHESIVE
Repair glue for soft plastic materials
Clear
Product overview
Bostik Soft Plastics is an ultra strong, quick drying, water resistant, clear adhesive that's perfect for making flexible repairs to things like inflatables, plastic raincoats, and tents.
- Formulated to work on soft plastics
- Provides a flexible bond
- Ultra strong and quick drying
- Water resistant
- Comes with a PVC repair patch
Bostik Soft Plastics is suitable for bonding:
- Flexible PVC
- Polyurethane
- Natural and sulfochlorinated rubbers
After something for hard plastic? Try Bostik Hard Plastics
Downloads & resources
Bostik DIY Malaysia Repair Soft Plastics Technical Data Sheet (284.8 KB)
Bostik DIY Malaysia Repair Soft Plastics Safety Data Sheet (369.02 KB)
How to use
Ensure that surfaces to be bonded are clean and dry. For best results do not use below 15°C.
Lightly abrade very smooth shiny surfaces using fine sandpaper, taking care not to damage any areas that will
be visible after bonding.
If using on rubber products, lightly roughen the surface to be repaired using a fine grade sandpaper.
Application
- Always open and use adhesive products over a protected surface.
- If required use a piece of the PVC patch provided.
- Spread an even film of adhesive onto both surfaces.
- Leave until almost dry (about 5 to 10 minutes).
- Press both surfaces together firmly until bonded.
- Replace cap immediately after use, to prevent the adhesive becoming unusable.
- Maximum bond strength is developed after approximately 48 hours.
Cleaning
- Always test sensitive surfaces before applying solvent cleaners.
- Clean greasy, waxy or oily surfaces with fresh acetone, twice to remove residues left by the first cleaning.
- Wet or dry adhesive can be removed with acetone.
FAQs
How do you prepare soft plastics before bonding?
Before applying Bostik Soft Plastic Adhesive, make sure the surfaces are clean, dry and free from dust, grease, oil and other contaminants that could interfere with adhesion.
For the best results, ensure the surfaces fit together properly and remove any residue before application. Proper surface preparation helps improve bonding performance and can contribute to a stronger, more reliable repair of soft plastic items.
What is the best way to clean Soft Plastic Adhesive from skin?
If Bostik Soft Plastic Adhesive gets on your fingers or skin, remove the adhesive as soon as possible before it fully cures.
Wet or dry adhesive residue can be removed using acetone. Prompt cleanup helps make removal easier and reduces the amount of adhesive left on the skin. When using Bostik Soft Plastic Adhesive, wearing gloves can help minimise accidental skin contact.
How long can Soft Plastic Adhesive be stored?
Bostik Soft Plastic Adhesive can be stored for up to 12 months from the date of manufacture when kept under the recommended storage conditions.
For best results, store the adhesive in its original packaging, in a cool, dry location and away from conditions that may affect product performance. Proper storage helps maintain the adhesive throughout its shelf life.
When should you use Soft Plastic Adhesive instead of Super Glue?
Use Bostik Soft Plastic Adhesive when repairing or bonding soft plastic materials. The adhesive is specifically formulated for soft plastic applications and is intended for substrates that require a dedicated plastic-bonding solution.
Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs on a variety of non-porous materials. For projects involving soft plastics, Bostik Soft Plastic Adhesive is generally the more suitable option because it has been specifically developed for that type of repair.
What does viscosity mean?
Viscosity describes how easily a liquid flows. A low-viscosity adhesive is thinner and flows more easily, while a high-viscosity adhesive is thicker and is less likely to run or drip.
In adhesives and sealants, viscosity can affect application, spreadability and how the product performs on vertical or horizontal surfaces.
How do you glue tent material?
To glue tent material, make sure the surfaces are clean and dry before applying an even layer of Bostik Soft Plastics Adhesive to both sides of the repair. Allow the adhesive to become almost dry, typically 5 to 10 minutes, then press the surfaces firmly together until bonded.
Bostik Soft Plastics Adhesive is designed for flexible repairs to soft plastic materials, including tents, and forms a water-resistant bond suitable for many outdoor repair applications.
What glue is suitable for vinyl?
The most suitable adhesive depends on the type of vinyl being repaired. For flexible PVC and vinyl materials, Bostik Soft Plastics Adhesive is designed for bonding soft plastics and creates a strong, flexible and water-resistant bond.
This makes Bostik Soft Plastics Adhesive suitable for many vinyl repair applications where flexibility and durability are important after bonding.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide