Frequently asked Questions

Yes, Blu Tack® Colour is available in different colours. The range includes blue, green, orange, pink and yellow.

Blu Tack® Colour can be used for a variety of creative and everyday applications, including displaying items, craft projects and modelling. Availability may vary by market and retailer.

Bostik Blu Tack® does not have a single weight limit that applies to every situation. Its holding performance depends on factors such as the surface type, surface condition, the size and weight of the item, and the amount of Blu Tack® used.

For the best results, use Bostik Blu Tack® on suitable clean surfaces and test it with the item you intend to display before relying on it for long-term mounting.

No, Bostik Blu Tack® is not tested on animals and does not contain ingredients made from animal by-products.

This makes Bostik Blu Tack® suitable for users looking to avoid animal testing and animal-derived ingredients.

If Bostik Blu Tack® is swallowed, rinse the mouth with water and give the person water to drink.

Medical advice should be sought if symptoms occur or continue, or if there are any concerns about accidental ingestion.

Bostik Blu Tack is suitable for both children and adults. However, it is not recommended for children under three years of age.

For craft activities, school projects and creative use, younger children should always be supervised by an adult to help ensure Blu Tack is used safely and appropriately.

Bostik Blu Tack can be used on a wide range of smooth surfaces, including glass, metal, plastic, painted walls and finished wood. The strength of the bond can vary depending on the condition and texture of the surface.

For the best results, apply Bostik Blu Tack to clean, dry surfaces that are free from dust, grease and loose materials. This helps maximise adhesion and keep lightweight items securely in place.

Blu Tack performs best on clean, dry surfaces that are free from dust, grease and loose materials. Good surface preparation helps improve adhesion and keeps items securely in place.

Very high temperatures can affect performance. If a surface or room exceeds 70°C, Blu Tack may soften and become less effective at holding lightweight items.

The best place to store Blu Tack® is in a tightly closed container in a dry, cool and well-ventilated location. Proper storage helps keep the product in good condition and ready for use when needed.

Bostik Blu Tack® is designed to be removable, but on some surfaces it may leave an oily mark, particularly if it has been in place for an extended period.

To minimise the risk of marking, remove Blu Tack® carefully by rolling it away from the surface rather than pulling it off. If any residue or marking remains, see the How to Remove Blu Tack® Stains from Walls guide for detailed cleaning advice.

Yes, Bostik Blu Stik can be used with photos and other paper materials for mounting and craft applications.

For the best results, apply Bostik Blu Stik evenly and use only the amount needed to secure the photo. If you are working with valuable or irreplaceable photographs, test first on a small area before full application.

No, Bostik Blu Stik does not stay blue after drying. The adhesive is blue when applied so you can see where it has been placed, but it dries clear once it has dried. This makes it useful for school projects, paper crafts and other creative applications where a visible adhesive line is not desired.

The operating temperature of a glue gun depends on the model.

Bostik Handy Hot Melt Glue Gun and Bostik DIY Hot Melt Glue Gun operate between 175°C and 200°C, while the Bostik Craft Cool Melt Glue Gun operates between 125°C and 135°C.

Using the correct glue gun and compatible glue sticks helps ensure reliable adhesive performance and safe operation.

Yes, Bostik Glue Gun Glue is highly water resistant and can provide a long-lasting bond in many DIY and repair applications. Once the adhesive has cooled and fully set, it can withstand moisture, temperature fluctuations and general wear.

To achieve the best performance, apply Bostik Glue Gun Glue to clean, dry surfaces and allow the adhesive to set fully before exposing the bond to demanding conditions.

Glue gun sticks are generally not considered toxic during normal use. However, when heated, glue gun adhesives may release fumes that can be irritating for some people, particularly those with respiratory sensitivities.

To help ensure safe use, work in a well-ventilated area and follow the instructions provided with the glue gun and adhesive sticks. As with many heated products, avoid using them near potential ignition sources. 

The lifespan of a glue gun can vary depending on how often it is used, how it is stored and how well it is maintained.

To help extend the life of a Bostik Glue Gun, use the recommended glue sticks, follow the operating instructions and store the tool properly when not in use.

No, not all glue sticks are suitable for every glue gun. Bostik Handy Hot Melt Glue Gun, Bostik DIY Hot Melt Glue Gun and Bostik Craft Cool Melt Glue Gun are designed to be used with compatible glue sticks that match the requirements of each tool.

Using the correct glue stick size and type helps ensure smooth feeding, consistent adhesive flow and reliable performance. Before using a new glue stick, check that it is suitable for your glue gun model.

The main difference between hot melt and cool melt glue guns is the temperature at which the adhesive is applied.

Hot melt glue guns use higher temperatures and are commonly used for general DIY, repair and craft applications where a strong bond is required. Cool melt glue guns operate at a lower temperature, making them suitable for temperature-sensitive materials and applications where a lower application temperature is preferred.

Always use glue sticks that are designed for your specific glue gun to help achieve the best results

No, it is generally recommended to leave a partially used Glue Stick inside the glue gun. Removing it may put unnecessary strain on the feeding mechanism and could affect how the tool operates.

If excess Glue Stick extends from the back of the gun, it can be trimmed carefully. Once the remaining Glue Stick becomes too short to feed properly, simply insert a new Glue Stick and continue using the glue gun as normal.

Bostik Glu Dots are removable adhesive dots that provide an instant bond for creative and craft projects. They are commonly used for scrapbooking, card making, collages and model making.

They are also ideal for attaching small decorative items such as beads, sequins, rhinestones and wiggly eyes with accurate placement. 

Glu Dots adhere to a range of materials, including paper, wood, plastic, metal and glass, making them a versatile choice for hobby, school and craft activities

Glu Dots have a shelf life of up to 24 months from the date of manufacture when stored in their original unopened packaging. For best results, store Glu Dots in dry conditions between 5°C and 25°C to help maintain product quality and adhesive performance.

Yes, Bostik Glu Stik is a non-toxic adhesive designed for school projects, crafts and everyday creative activities.

Its water-soluble formula makes cleanup easy, making Bostik Glu Stik a safe and practical choice for children’s art and craft projects. As with any adhesive product, adult supervision may be appropriate depending on the child's age and the activity.

If Glue Stick gets into a child's eye, rinse the affected eye immediately with plenty of clean water. Continue flushing the eye thoroughly to help remove any remaining adhesive.

If irritation, discomfort or redness continues after rinsing, seek medical advice as a precaution. Always follow the safety instructions provided with the product.

If Bostik Super Glue bonds to your fingers or skin, wash the area with warm soapy water and gently separate the skin using a blunt object if needed.

Avoid pulling bonded skin apart forcefully, as this may damage the skin. If the adhesive cannot be removed safely or irritation persists, seek appropriate medical advice.

Bostik Super Glue has a shelf life of 12 months from the date of manufacture when stored under the recommended conditions.

For best results, store the adhesive in a cool, dry place away from direct sunlight and keep the container tightly closed when not in use. Proper storage can help maintain performance throughout its shelf life.

If Bostik Glu Stik gets onto a surface, remove as much of the adhesive as possible and clean the area promptly.

Because Bostik Glu Stik is water soluble, any remaining adhesive can be cleaned away using water. For delicate materials or finished surfaces, test your cleaning method on a small, inconspicuous area first.

Use Bostik Glu Dots when you need a quick, clean and instant way to attach lightweight items without waiting for glue to dry. They are ideal for scrapbooking, card making, collages, model making and decorative craft projects.

Bostik Glu Dots are also suitable for attaching embellishments such as beads, sequins, rhinestones and wiggly eyes to materials including paper, wood, plastic, metal and glass.

Viscosity describes how easily a liquid flows. A low-viscosity adhesive is thinner and flows more easily, while a high-viscosity adhesive is thicker and is less likely to run or drip.

In adhesives and sealants, viscosity can affect application, spreadability and how the product performs on vertical or horizontal surfaces.

Bostik Foam Pads bond to most flat surfaces, which may include mirrors. However, Foam Pads are designed primarily for arts, crafts, scrapbooking, card making, collages, découpage and model-making applications.

Before using Foam Pads on a mirror, test a small area first to confirm suitability for your specific application

Bostik Glitter Glue typically dries in around 30 minutes under normal conditions. Drying times can vary depending on the amount applied, the surface being decorated and the surrounding temperature and humidity.

For the best results, allow Bostik Glitter Glue to dry completely before handling or moving the project to avoid disturbing the finish.

Bostik Glitter Glue Pens can be used to decorate paper crafts, cardboard, fabric, gift boxes, photo frames and many other creative projects. They are ideal for adding colourful glitter effects, decorative details and personalised designs.

You can use them to write words, colour shapes, create decorative borders and add sparkle to handmade cards and decorations. If you are looking for inspiration, see the 6 Easy Glitter Glue Craft Ideas guide for creative project ideas and step-by-step activities.

Bostik Glitter Glue can be used on a variety of craft materials, including paper crafts, cardboard, fabric, gift boxes and photo frames. It is designed for decorating projects and adding colourful glitter effects to creative activities.

6 easy glitter glue craft ideas Before application, make sure surfaces are clean, dry and free from grease, oil, dust and other contaminants to help achieve the best results.

If you're looking for project inspiration, see the 6 Easy Glitter Glue Craft Ideas guide for creative ways to use Bostik Glitter Glue on cards, decorations and craft projects.

Before applying Bostik BL 50, clean and degrease the surface you want to treat. Once the surface is prepared, spray the product from a distance of approximately 20-30 cm and work it into the surface using a soft cloth.

Proper preparation helps Bostik BL 50 lubricate, protect and penetrate more effectively on metal parts and mechanical components.

Use Bostik Repair-All when you need a versatile adhesive that can bond a wide range of materials and accommodate movement after curing. It is designed for repair and assembly applications where flexibility can be important.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. The adhesive forms a strong bond in seconds, making it ideal for small repairs where speed is a priority.

The best option depends on the type of repair you are carrying out. Bostik Super Glue Gel is ideal when you need a non-drip adhesive that stays in place and provides greater application control, particularly on vertical surfaces.

Bostik Super Glue Liquid is better suited to precision bonding and fast-flowing applications where the adhesive needs to spread into tight-fitting joints. For many everyday repairs, choosing the adhesive that matches the application is more important than choosing the strongest option.

Yes, Bostik Super Glue remains effective in cold conditions and is designed to provide a strong, durable bond at low temperatures. Many Bostik Super Glue products continue to perform reliably in temperatures as low as -20°C.

For the best results, ensure the surfaces are clean and dry before application and follow the instructions on the product packaging.

Bostik super glues are non-flammable products that do not easily ignite or burn during normal use. To maintain product performance and safe handling, always follow the instructions provided on the packaging and store the adhesive in a suitable location.

Bostik Super Glue Liquid and Bostik Super Glue Gel can withstand temperatures from-55°C to +80°C, providing reliable bonding performance across a wide range of everyday repair applications.

For applications exposed to temperature fluctuations, check that the adhesive is suitable for the materials and conditions involved before use.

Bostik Super Glue Liquid and Bostik Super Glue Gel are water and heat resistant. However, the available product information does not describe either product as waterproof.

If your project may be exposed to moisture, choose an adhesive that is suitable for the intended conditions and follow the product instructions for best results.

Bostik Super Glue is made from modified ethyl cyanoacrylate, a fast-curing adhesive technology designed to create strong bonds in seconds.

When the adhesive comes into contact with moisture on a surface, it cures rapidly and forms a durable bond. This makes Bostik Super Glue suitable for a wide range of household repairs and precision bonding applications.

Yes, Bostik Fabric Glue is designed to create a durable bond that can withstand washing once the adhesive has fully cured. This makes it suitable for clothing repairs, fabric alterations and a variety of textile craft projects.

For the best results, allow Bostik Fabric Glue to dry completely before washing the item. Following the product instructions can help maximise bond strength and durability.

Bostik Fabric Glue works by joining fabric fibres together to create a flexible bond without the need for sewing. As the adhesive dries, it helps hold the materials in place while remaining suitable for clothing repairs, alterations and textile projects.

This allows Bostik Fabric Glue to be used for tasks such as repairing tears, attaching patches, creating hems and completing fabric-based craft projects. For best results, apply the adhesive to clean, dry fabric and allow it to dry fully before use.

Although Bostik Fabric Glue may feel dry sooner, it is best to wait approximately 24 hours before using, washing or regularly handling the bonded fabric.

Temperature, humidity, fabric type and adhesive thickness can all affect drying time. Allowing the adhesive to dry completely helps achieve a stronger and more durable repair.

Bostik Fabric Glue can help reduce fraying by bonding loose fibres together and strengthening fabric edges. Once cured, it forms a flexible bond that is suitable for repairs, alterations and textile craft projects where extra edge reinforcement is needed.

For best results, apply the adhesive to clean, dry fabric and allow it to cure fully before handling or washing the item.

Yes, Bostik Spray Adhesive is flammable and should be kept away from heat, sparks, open flames and other sources of ignition.

When using spray adhesive, work in a well-ventilated area and follow all safety instructions on the product packaging. Avoid exposing aerosol containers to high temperatures or direct heat sources.

To clean Bostik Spray Adhesive residue or overspray, wipe the affected area as soon as possible using a cloth dampened with mineral turpentine.

Prompt cleaning helps prevent adhesive build-up and makes residue easier to remove. The same method can also be used to clean the spray nozzle after use to keep the product working effectively.

Bostik Fast Tak Permanent Spray Adhesive is a permanent contact adhesive supplied in an aerosol format. It is suitable for bonding a wide range of materials, including paper, card, foam, leather, rubber, plastic, metal, wood, stone and concrete.

To use Bostik Fast Tak Permanent Spray Adhesive, shake the can thoroughly before application. Spray evenly from a distance of 15 to 20 cm, allow the adhesive to become touch dry for a few seconds, then carefully align the surfaces and press them firmly together.

Yes, Bostik PVA Glue normally dries clear once it has fully cured. Although the adhesive appears white when first applied, it gradually becomes transparent as the moisture evaporates.

The final finish can depend on the thickness of the adhesive layer, the material being bonded and the drying environment. Applying only the amount needed can help achieve a cleaner result.

Bostik PVA Glue is a solvent-free, general-purpose adhesive used for arts and crafts, school projects and creative activities. It dries clear and is easy to use on a variety of materials.

It can be used on paper, card, wood and fabric, making it suitable for scrapbooking, card making, modelling and other hobby and craft projects.

Bostik PVA Glue reaches full cure in approximately 12 hours on paper and card, and approximately 24 hours on wood.

Drying and curing times can vary depending on the materials being bonded and the application conditions. For best results, use Bostik PVA Glue on clean, dry surfaces and apply it at temperatures above 15°C.

Yes, Bostik PVA White Glue is supplied as a liquid adhesive. It is a PVA emulsion with a liquid form that can be applied directly from the container and dries to form a strong bond.

The adhesive is suitable for a variety of craft and bonding applications and is designed to be easy to apply while wet before curing as it dries.

Bostik PVA Glue is commonly used for arts and crafts, school projects, model making and general bonding tasks. It works well on porous materials such as paper, card, wood and fabric, making it a versatile adhesive for creative and household applications.

For leather and imitation leather projects, Bostik Leather Glue is a more suitable choice, while Bostik Fabric Glue is specifically designed for fabric repairs and textile applications.

Bostik PVA Glue can bond to a range of porous materials, including paper, card, wood and fabric, making it ideal for arts, crafts, school projects and hobby applications. 

For materials such as leather, use Bostik Leather Glue, while Bostik Fabric Glue is a better choice for fabric repairs and textile projects that require greater flexibility and durability.

Yes, Bostik PVA Glue can stick to leather and many fabrics, making it suitable for light-duty and craft applications.

For stronger, more flexible and longer-lasting repairs, a specialist adhesive is recommended. Bostik Leather Repair is designed specifically for leather and imitation leather, while dedicated Bostik Fabric Repair is better suited for demanding fabric repairs and applications.

Bostik PVA Glue is a solvent-free, general-purpose adhesive that dries clear and is commonly used for arts, crafts, school projects and creative activities.

Unlike many specialist adhesives that are designed for specific materials or applications, Bostik PVA Glue is intended for everyday bonding tasks on materials such as paper, card, wood and fabric, making it a versatile choice for hobby and craft projects.

Yes, Bostik PVA White Glue can be used for many of the same applications as school glue. It is a PVA emulsion adhesive designed for paper, cardboard, fabric and other craft materials commonly used in educational and creative projects.

Because it is supplied as a water-based PVA adhesive, it is suitable for a wide range of art, craft and classroom activities where a general-purpose white glue is required.

If you're not sure which adhesive to use, try the Bostik Glue Guide.

The Bostik Glue Guide helps you find the most suitable adhesive based on the materials you want to bond and the type of project you are working on. Whether you're repairing, crafting or completing a DIY job, it can help you choose the right product.

Bostik Gasket Sealant can be used for sealing and bonding applications where a durable, flexible seal is required. It is suitable for use as a formed-in-place gasket (FIPG) on flanged joints in equipment such as transmissions, compressors and pumps.

It can also be used on valve covers, timing covers, crankcases, radiators and thermostats, as well as for other general-purpose sealing and bonding applications.

Yes, Bostik Gasket Sealant is suitable for many automotive sealing applications. It is an RTV silicone sealant and gasket maker designed to provide a durable, flexible seal that resists heat, vibration, oil, water and automotive fluids.

It can be used on automotive components such as valve covers, timing covers, crankcases, radiators and thermostats, as well as for sealing flanged joints in a wide range of equipment.

Bostik Gasket Sealant is designed for high-temperature applications and can withstand temperatures of up to 260°C under continuous exposure and 317°C intermittently.

Its RTV silicone formulation is also designed to resist vibration, thermal cycling, moisture, oil, water and automotive fluids, making it suitable for demanding sealing applications in automotive and equipment environments.

Bostik Gasket Sealant typically becomes tack-free in approximately 8 to 15 minutes and reaches full cure in around 24 hours under normal conditions.

Cure times can vary depending on factors such as temperature, humidity, bead size and ventilation. For best results, allow the sealant to cure fully before placing the sealed component into service.

To apply Bostik Gasket Sealant, first ensure all surfaces are clean, dry and free from dust, dirt, rust, oil and grease. Cut the nozzle to the required bead size and apply a continuous, even bead of sealant.

For best results, apply a bead approximately 2 to 4 mm wide using steady pressure. If required, smooth the sealant with a spatula dipped in mild detergent and then allow it to cure. The sealant typically becomes tack-free within 8 to 15 minutes and reaches full cure in approximately 24 hours.

Yes, Bostik Gasket Sealant is suitable for use on vertical surfaces. Its non-slump formulation helps the sealant stay in place after application, making it suitable for vertical and overhead sealing applications.

For best results, apply the sealant to clean, dry surfaces and use a continuous, even bead as recommended in the application instructions.

Bostik Gasket Sealant is available in Red, Black and Grey colour options.

The choice of colour is typically based on the appearance requirements of the application or the component being sealed. All variants are designed for sealing, bonding and formed-in-place gasket applications.

Yes, Bostik Gasket Sealant is designed to resist oil, water and automotive fluids, making it suitable for automotive and equipment sealing applications.

Its RTV silicone formulation is also resistant to vibration and thermal cycling, helping it maintain a durable seal in demanding operating environments.

Yes, Bostik Gasket Sealant is suitable for applications where vibration is present. Its RTV silicone formulation is designed to resist vibration and thermal cycling, helping to maintain a durable seal in demanding operating conditions.

This makes it suitable for automotive and equipment sealing applications where components may be exposed to movement, temperature changes and mechanical stress during normal operation.

Before applying Bostik Gasket Sealant, make sure all surfaces are clean, dry and free from dust, dirt, rust, oil and grease. Proper surface preparation helps the sealant adhere correctly and achieve a reliable seal.

Once the surfaces have been prepared, apply a continuous, even bead of sealant using the recommended application method.

Yes, excess Bostik Gasket Sealant can be removed.

If the sealant is still uncured, remove the excess using a suitable solvent. Once the sealant has fully cured, it must be removed mechanically.

For the best finish, remove excess sealant promptly after application and before full cure occurs.

Store Bostik Gasket Sealant in a cool, dry place and keep the container tightly closed when not in use. Following the recommended storage conditions helps maintain product performance and maximise shelf life.

Always store the product according to the instructions provided on the packaging and technical data sheet, and protect it from conditions that could affect the sealant before use.

Before using Bostik Fabric Glue, make sure the fabric is clean, dry and free from dust, dirt, oils and loose fibres.

Preparing the fabric properly helps the adhesive bond more effectively and can improve the durability of repairs, alterations and textile projects. For the best results, allow the adhesive to dry fully before using or washing the item.

Before applying Bostik General Purpose Silicone, make sure all surfaces are clean, dry and free from dust, grease, oil and other contaminants.

Removing dirt, residue and loose material helps the silicone adhere more effectively and can improve sealing performance. Preparing the surface properly is especially important when creating watertight seals around joints, gaps and household fixtures.

Before applying Bostik Hard Plastic Adhesive, ensure the plastic surfaces are clean, dry and free from dust, grease, oil and other contaminants.

For the strongest bond, make sure the parts fit together properly and remove any residues that could interfere with adhesion. Good surface preparation helps improve bonding performance and reliability when repairing hard plastic items.

Before applying Bostik Leather Repair, make sure the leather or imitation leather surface is clean, dry and free from dust, grease, polish and other contaminants.

Preparing the material properly helps the adhesive make better contact with the surface and can improve the durability of leather repairs, patching and restoration projects. Allow the cleaned surface to dry completely before applying the adhesive.

Before applying Bostik Repair All, make sure the surfaces are clean, dry and free from dust, grease, oil and other contaminants that could affect adhesion.

For the best bonding performance, ensure the materials fit together properly and remove any loose residue before application. Proper surface preparation helps create a stronger and more durable bond across a wide range of repair and assembly projects.

Before applying Bostik Soft Plastic Adhesive, make sure the surfaces are clean, dry and free from dust, grease, oil and other contaminants that could interfere with adhesion.

For the best results, ensure the surfaces fit together properly and remove any residue before application. Proper surface preparation helps improve bonding performance and can contribute to a stronger, more reliable repair of soft plastic items.

Before applying Bostik Super Glue, make sure the surfaces are clean, dry and free from dust, dirt, grease and other contaminants.

For the best bonding performance, ensure the surfaces fit closely together and remove any residue that could interfere with adhesion. Proper surface preparation helps Bostik Super Glue form a stronger and more reliable bond.

Before using Bostik T160 Foam Cleaner, remove or protect any food products and packaging materials in the area being cleaned, then shake the aerosol can thoroughly before use.

When cleaning fabrics, upholstery or other delicate materials, test the cleaner on a hidden area first. This can help confirm suitability before treating the full surface.

Before using Bostik T170 Air Spray, make sure the item or area you want to clean is accessible and free from loose objects that could be disturbed by compressed air.

Hold the can upright during use and direct short bursts of air at the area being cleaned. Bostik T170 Air Spray is designed to remove dust and debris from hard-to-reach locations such as keyboards, electronic components, machine parts, cameras and instruments.

Before applying Bostik Wood Fix, ensure the surfaces are clean, dry, stable and free from dust, grease and other contaminants.

For the best bonding results, make sure the parts fit together correctly and remove any residue that could interfere with adhesion. Proper preparation helps improve bond quality and reliability when repairing or assembling wooden items.

Before applying Bostik XpertFix, make sure the PVC, CPVC or rigid PVC surfaces are clean, dry and free from dirt, dust, grease and other contaminants that could interfere with adhesion.

For the most reliable bond, ensure the mating surfaces fit together correctly and remove any residue before application. Proper preparation helps Bostik XpertFix form a strong bond on pipe and rigid plastic repair projects.

To achieve the best results with Bostik Miracle Mounting Tape, make sure the surface is clean, dry and free from grease, oil, moisture, dirt and other contaminants. Smooth, even surfaces generally provide the strongest adhesion.

Press the tape firmly and evenly against the surface to remove air bubbles and create optimal contact. For best performance, apply the tape within the recommended temperature range and avoid surfaces with imperfections that could reduce adhesion.

If Bostik Blu Stik gets onto a surface, remove as much of the adhesive as possible and clean the area promptly.

Because Bostik Blu Stik is water-soluble and washes out, remaining adhesive can usually be cleaned away with soap and warm water. For delicate materials or finished surfaces, test your cleaning method on a small, less visible area first.

If Bostik Repair-All gets on your fingers or skin, remove any excess adhesive as quickly as possible before it cures.

For surplus adhesive, use nail varnish remover or acetone to assist with cleanup, then wash the affected area thoroughly. Avoid forcing bonded skin apart or scraping the adhesive aggressively.

If Bostik BL 50 gets on your fingers or hands, wipe away any excess product as soon as possible and wash the affected area thoroughly.

Avoid prolonged contact with the product and follow the safety instructions provided with the aerosol. If irritation occurs or persists, seek appropriate medical advice.

If Bostik Fabric Glue gets on your fingers or skin, wash it off as quickly as possible using warm soapy water before the adhesive dries.

Prompt cleaning helps remove wet adhesive more easily. Once the adhesive has dried, removal can become more difficult, so it is best to clean the affected area immediately after contact.

If Bostik General Purpose Silicone gets on your fingers or skin, remove any excess silicone as quickly as possible before it cures.

For uncured silicone, clean the affected area using mineral turpentine and then wash the skin thoroughly. Prompt cleanup helps make removal easier before the sealant sets.

If Bostik Hard Plastic Adhesive gets on your fingers or skin, remove it as soon as possible before it sets.

Before the adhesive cures, it can be removed using acetone. Prompt cleanup helps make removal easier and reduces the amount of adhesive left on the skin. When using Bostik Hard Plastic Adhesive, wearing gloves can help reduce the risk of skin contact in the first place.

If Bostik Leather Glue gets on your fingers or skin, remove any excess adhesive as soon as possible before it dries completely.

Surplus adhesive can be cleaned away using acetone or nail varnish remover. When using Bostik Leather Glue, wearing gloves can help reduce the risk of accidental skin contact.

If Bostik Soft Plastic Adhesive gets on your fingers or skin, remove the adhesive as soon as possible before it fully cures.

Wet or dry adhesive residue can be removed using acetone. Prompt cleanup helps make removal easier and reduces the amount of adhesive left on the skin. When using Bostik Soft Plastic Adhesive, wearing gloves can help minimise accidental skin contact.

If Bostik Wood Fix gets on your fingers or skin, remove any excess adhesive as quickly as possible before it cures.

Surplus adhesive can be cleaned away using nail varnish remover or acetone. To help avoid accidental skin contact, gloves are recommended when using Bostik Wood Fix.

If Bostik Xpert Fix gets on your fingers or hands, remove any excess adhesive as soon as possible before it fully sets.

Wash the affected area carefully and avoid forcibly pulling bonded skin apart. If adhesive remains on the skin or causes irritation, seek appropriate advice before attempting further removal.

Bostik BL 50 can be stored for up to 24 months when kept in its original unopened packaging under the recommended storage conditions.

For best results, store the product between +5°C and +25°C in shaded conditions. Correct storage helps maintain the performance and reliability of Bostik BL 50 throughout its shelf life.

Bostik Fabric Glue can be stored for up to 18 months from the date of manufacture when kept under the recommended storage conditions.

For best results, store the adhesive below 30°C in a cool, dry place and keep the container properly closed when not in use. Correct storage helps maintain the performance of the adhesive throughout its shelf life.

Bostik General Purpose Silicone can be stored for up to 12 months from the date of manufacture when kept in its original unopened packaging under the recommended storage conditions.

For best results, store the product in dry conditions and protect it from excessive heat and moisture. Proper storage helps maintain product performance throughout its shelf life.

Bostik Hard Plastic Adhesive can be stored for up to 12 months from the date of manufacture when kept under the recommended storage conditions.

For best results, store the adhesive in a cool, dry place and keep the container tightly closed when not in use. Proper storage helps maintain product performance throughout its shelf life.

Bostik Leather Repair can be stored for up to 12 months from the date of manufacture when stored as directed.

For best results, store the adhesive in cool, dry conditions below 30°C, away from direct sunlight, and keep the container properly closed when not in use. Correct storage helps maintain product performance throughout its shelf life.

Bostik Repair-All can be stored for up to 12 months from the date of manufacture when kept in its original unopened packaging under the recommended storage conditions.

For best results, store the adhesive in dry conditions between +5°C and +30°C. Proper storage helps maintain product performance throughout its shelf life.

Bostik Soft Plastic Adhesive can be stored for up to 12 months from the date of manufacture when kept under the recommended storage conditions.

For best results, store the adhesive in its original packaging, in a cool, dry location and away from conditions that may affect product performance. Proper storage helps maintain the adhesive throughout its shelf life.

Bostik T160 Foam Cleaner can be stored for up to 24 months when kept in its original unopened packaging under the recommended storage conditions.

For best results, store the product between +5°C and +25°C in shaded conditions. Proper storage helps maintain cleaning performance throughout the product's shelf life.

Bostik Wood Fix can be stored for up to 12 months when kept under the recommended storage conditions.

For best results, store the product in a cool, dry location between +10°C and +25°C and protect it from moisture and adverse weather conditions. Proper storage helps maintain adhesive performance throughout its shelf life.

Bostik XpertFix can be stored for up to 12 months from the date of manufacture when stored under the recommended conditions.

For best results, store the product in a cool, dry location below 30°C, ideally between 20°C and 25°C, and keep the container properly closed when not in use. Correct storage helps maintain product performance throughout its shelf life.

Store Bostik Blu Stik in cool, dry conditions away from direct sunlight and protect it from freezing and frost.

The available technical information does not specify a shelf-life period for Bostik Blu Stik, but following the recommended storage conditions can help maintain product performance

Bostik Blu Tack® can be stored for up to 60 months from the date of manufacture when kept in its original unopened packaging under the recommended storage conditions.

For best results, store Bostik Blu Tack® in dry conditions between +15°C and +30°C. Proper storage helps maintain product performance throughout its shelf life.

Bostik Clag® Paste can be stored for up to 12 months from the date of manufacture when stored under the recommended conditions.

For best results, store the product in a cool, dry place between 5°C and 35°C and keep it out of direct sunlight. Proper storage helps maintain adhesive performance throughout its shelf life.

Bostik Small Foam Pads can be stored for up to 24 months from the date of manufacture when kept in their original unopened packaging under the recommended storage conditions.

For best results, store the pads in dry conditions between +5°C and +25°C. Proper storage helps maintain adhesive performance and usability throughout the product’s shelf life.

Store Bostik Glitter Glue in a cool, dry, well-ventilated place between 5°C and 35°C, away from direct sunlight.

The available technical information provides storage guidance but does not specify a shelf-life period. Following the recommended storage conditions can help maintain product quality during storage.

Bostik Glu Stik can be stored for up to 24 months when kept at room temperature under the recommended storage conditions.

For best results, keep the glue stick capped when not in use and store it in a cool, dry location. Proper storage helps maintain product performance throughout its shelf life.

Bostik Spray Adhesive can be stored for up to 12 months from the date of manufacture when stored as directed.

For best results, store the product in a cool, dry place between-5°C and +25°C, out of direct sunlight. Proper storage helps maintain performance throughout the product's shelf life.

Bostik Hobby Craft PVA Glue can be stored for up to 12 months from the date of manufacture when stored under the recommended conditions.

For best results, store the adhesive in a cool, dry place between 5°C and 25°C and keep it out of direct sunlight. Proper storage helps maintain the performance of the product throughout its shelf life.

Bostik Colour & Stik can be stored for up to 18 months from the date of manufacture when stored as directed.

For best results, store the product in a cool, dry place between 5°C and 25°C and keep it out of direct sunlight. Proper storage helps maintain product performance throughout its shelf life.

Bostik Fix Stik can be stored for up to 18 months from the date of manufacture when stored as directed.

For best results, store the product in a cool, dry place between 5°C and 25°C, out of direct sunlight. Proper storage helps maintain product performance throughout its shelf life.

Bostik Hobby Craft Dual Tip Glue can be stored for up to 18 months from the date of manufacture when stored as directed.

For best results, store the adhesive in a cool, dry place between 5°C and 25°C and keep it out of direct sunlight. Proper storage helps maintain product performance throughout its shelf life.

Bostik Quick Glu can be stored for up to 12 months from the date of manufacture when stored as directed.

For best results, store the product in a cool, dry place between 5°C and 25°C and keep it out of direct sunlight. Proper storage helps maintain adhesive performance throughout its shelf life.

Bostik PVA White Glue can be stored for up to 12 months in its original sealed packaging when stored correctly.

For best results, store the adhesive above 5°C in a dry, cool, ventilated area away from direct sunlight, strong acids, heat sources and strong oxidising agents. Proper storage helps maintain product performance throughout its shelf life.

Use Bostik Fabric Glue when repairing, altering or bonding fabrics and textiles. The adhesive is designed to create a flexible bond and is suitable for clothing repairs, hems, patches and other fabric-based projects.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. For projects where fabric flexibility is important after bonding, Bostik Fabric Glue is generally the more suitable option.

Use Bostik General Purpose Silicone when you need to seal joints, fill gaps or create a flexible, watertight seal around household fixtures and surfaces. The product is designed as a silicone sealant rather than a rapid-bonding adhesive.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. If the goal is to bond materials together quickly, Bostik Super Glue is generally the better choice. If the goal is sealing, waterproofing or filling a joint, Bostik General Purpose Silicone is usually more suitable.

For most leather repair projects, Bostik Leather Glue is the better choice because it is specifically designed for bonding leather and imitation leather while maintaining flexibility after drying.

Bostik Super Glue is a fast-curing cyanoacrylate adhesive that creates a strong bond in seconds and can be useful for quick repairs. However, when the repaired item needs to flex during normal use, Bostik Leather Glue is generally the more suitable option.

Use Bostik Hard Plastic Adhesive when repairing or bonding hard plastic materials. The adhesive is specifically formulated for hard plastic applications and is intended for substrates such as ABS, nylon, PVC-U and high-impact polystyrene.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs on a variety of non-porous materials. For projects involving hard plastics, Bostik Hard Plastic Adhesive is generally the more suitable option because it has been specifically developed for that type of repair.

Use Bostik Soft Plastic Adhesive when repairing or bonding soft plastic materials. The adhesive is specifically formulated for soft plastic applications and is intended for substrates that require a dedicated plastic-bonding solution.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs on a variety of non-porous materials. For projects involving soft plastics, Bostik Soft Plastic Adhesive is generally the more suitable option because it has been specifically developed for that type of repair.

If Bostik Blu Tack® gets caught in hair, use an edible oil to help loosen the adhesive.

Gently work the oil into the affected area, remove the Blu Tack® carefully, then wash the hair with shampoo as normal. This helps remove any remaining residue.

Use the Bostik HG3 Hot Melt Glue Gun when you need to assemble, position or bond craft materials, decorative items or larger components using hot melt glue sticks. It is often a practical choice for hobby, craft and general DIY projects where a larger adhesive bead is required.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. Bostik Super Glue bonds many non-porous materials in seconds, making it more suitable for small repairs where accuracy and speed are important.

Use a Bostik Mini Hot Melt Glue Gun when working on craft projects, decorations, hobby applications or larger assemblies that benefit from hot melt glue sticks and a more generous adhesive bead.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. Bostik Super Glue bonds many non-porous materials in seconds, making it a better choice for small repairs where speed and accuracy are important.

Use a Bostik Cool Craft Melt Glue Gun when working on craft projects, decorations, model making or other creative applications that benefit from hot melt glue sticks and controlled adhesive application.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. Bostik Super Glue bonds many non-porous materials in seconds, making it a better choice for small repairs where speed and accuracy are important.

Use Bostik Wood Fix when repairing, assembling or bonding wood materials. The adhesive is specifically designed for wood applications and is suitable for wood joints, furniture repairs and other woodworking projects.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. For projects involving wood where a dedicated wood adhesive is preferred, Bostik Wood Fix is generally the more suitable option because it has been developed specifically for wood bonding applications.

Use Bostik Xpert Fix when bonding or repairing PVC, CPVC and rigid PVC materials. It is specifically formulated for pipe-related applications and creates strong, waterproof bonds on these substrates.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding on a wide range of non-porous materials. For projects involving PVC or CPVC pipe systems, Bostik Xpert Fix is generally the more suitable option because it has been developed specifically for those materials.

If Bostik Blu Tack® gets on clothing, apply an edible oil to the affected area to help soften and loosen the adhesive.

Once the Blu Tack® has been removed, wash the garment as normal according to the fabric care instructions. This can help remove any remaining residue from the fabric.

If Bostik Blu Tack® gets stuck in carpet fibres, use an edible oil to help loosen the adhesive before carefully removing it. Once the Blu Tack® has been lifted away, clean the affected area according to the carpet manufacturer's recommendations.

For detailed step-by-step instructions, see the Malaysia guide How to Remove Blu Tack® from Carpet, which explains the cleaning process in more detail and provides additional carpet-cleaning advice.

If Bostik Blu Tack® is stuck to wallpaper, carefully roll the adhesive away from the surface rather than pulling it off suddenly. This can help minimise the risk of damaging delicate wall coverings.

If a mark remains after removal, see the Malaysia guide How to Remove Blu Tack® Stains from Walls for step-by-step advice on dealing with Blu Tack® residue and wall marks.