Product overview
Bostik Repair All is an all-purpose repair adhesive for various kinds of surfaces. When cured, it forms a durable rubber.
- Solvent, isocyanate, phthalate, and tin free, with almost no odour
- Dual nozzles for fine and wide applications
- High temperature resistance
- Paintable
- Non-corrosive
Bostik Repair All provides excellent adhesion to many substrates, including wet surfaces. It's best for:
- Joint wood
- Glass
- Metal
- Plastic or mineral based substrates
- Skirting boards
- Cables
Downloads & resources
Bostik DIY Malaysia Repair Assembly RepairAll Technical Data Sheet (523.5 KB)
How to use
Ensure all surfaces are clean, dry, and free of dust, dirt, rust, oil, and other contaminants.
We recommend a preliminary test of the compatibility of the adhesive with adjoining materials before use.
Application
- To bond non-absorbent surfaces such as metal or glass, use a brush to apply a thin film of adhesive to both surfaces. Allow 5 to 10 minutes drying time and then, having correctly positioned the surfaces, press them together firmly. The bond will be instant and non-adjustable.
- If one or both surfaces are absorbent apply a generous film of adhesive to one surface only and immediately join the two surfaces together under pressure. Note: using this technique, initial bond strengths will be lower.
Cleaning
- Remove excess uncured sealant with a damp cloth or water immediately.
- Cured sealant is best removed by mechanical scraping or sanding.
- Use Bostik Handy Wipe towels to remove adhesive from skin.
FAQs
When should you use Repair-All instead of Super Glue?
Use Bostik Repair-All when you need a versatile adhesive that can bond a wide range of materials and accommodate movement after curing. It is designed for repair and assembly applications where flexibility can be important.
Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. The adhesive forms a strong bond in seconds, making it ideal for small repairs where speed is a priority.
What does viscosity mean?
Viscosity describes how easily a liquid flows. A low-viscosity adhesive is thinner and flows more easily, while a high-viscosity adhesive is thicker and is less likely to run or drip.
In adhesives and sealants, viscosity can affect application, spreadability and how the product performs on vertical or horizontal surfaces.
How do you prepare surfaces before using Repair-All?
Before applying Bostik Repair All, make sure the surfaces are clean, dry and free from dust, grease, oil and other contaminants that could affect adhesion.
For the best bonding performance, ensure the materials fit together properly and remove any loose residue before application. Proper surface preparation helps create a stronger and more durable bond across a wide range of repair and assembly projects.
What is the best way to remove Repair-All from skin?
If Bostik Repair-All gets on your fingers or skin, remove any excess adhesive as quickly as possible before it cures.
For surplus adhesive, use nail varnish remover or acetone to assist with cleanup, then wash the affected area thoroughly. Avoid forcing bonded skin apart or scraping the adhesive aggressively.
How long can Repair-All be stored?
Bostik Repair-All can be stored for up to 12 months from the date of manufacture when kept in its original unopened packaging under the recommended storage conditions.
For best results, store the adhesive in dry conditions between +5°C and +30°C. Proper storage helps maintain product performance throughout its shelf life.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide