DIY wooden peg trivet

Keep your counters safe and bring a pop of colour to your kitchen!

Instructions

STEP 1: Preparation

Separate the 2 halves of the pegs. Soak pegs in clothing dye or coat with stain, and allow to dry.

STEP 2: Silicone

Carefully silicone the pegs in pairs (back to back). Once the silicone has cured, silicone the paired pegs to form a circular trivet.

IMPORTANT

Colour can be applied to the asssembled trivet, but be sure that there is no silicone on the exposed wooden surfaces. Dye/Stain will not penetrate through the silicone.

TIP

Seal with a water-based polyurethane, heat resistant sealer.

See all products