Repair

No, Bostik Hot Glue Sticks are non-toxic and suitable for a wide range of craft, hobby and DIY applications.

Although Bostik Hot Glue Sticks are non-toxic, the melted adhesive and glue gun nozzle can become very hot during use. Always follow the product instructions and take care when handling hot adhesive.

No - using the wrong glue sticks could block and damage your Bostik glue gun. We have three variations of glue gun, Handy Hot Melt Glue Gun, DIY Hot Melt Glue Gun and Craft Cool Melt Glue Gun and each of our glue guns have specific glue sticks that are available. 

Bostik glue gun sticks are sold as individual packs of 14 Hot Melt Glue Sticks or 26 Cool Melt Glue Sticks.

Bostik Blu Stick is acid-free so it's safe to use with your photos.

Yes, Bostik PVA Glue typically dries clear once fully cured. Although it appears white when applied, it becomes more transparent as it dries.

The final appearance can vary depending on the material, the amount applied and the drying conditions. For the neatest finish, apply only as much adhesive as needed.

Blu Tack® is also available in a 5 colour pack - pink, green, blue, yellow & orange.

No, Bostik Super Glue is not usually the best option for repairing leather. Leather is a flexible material, so repairs often require an adhesive that can move with the surface without becoming brittle.

For leather and imitation leather repairs, Bostik Leather Glue is generally a better choice because it is designed to provide a strong, flexible and durable bond that can withstand everyday movement and wear. Meer regels weergeven

A super glue liquid has a low viscosity, meaning the liquid flows easily. This type of formula is great for filling horizontal surface cracks and fractures where the adhesive can flow into the cracks. We have two types available: Super Glue Liquid & Super Glue Gel.

Bostik Blu Stick is a great way to show you where you've applied your glue, but it actually dries totally clear!

Yes, Bostik Super Glue can be used in cold temperatures without significantly affecting its bonding performance. Bostik Super Glue products are formulated to provide a strong, long-lasting bond and can remain effective in temperatures as low as -20°C.

For optimal adhesion, make sure surfaces are clean, dry and properly prepared before applying the adhesive.

If a glue stick becomes stuck in a glue gun, unplug the glue gun and allow it to cool completely before attempting to deal with the blockage.

Bostik Glue Guns are designed so that the glue stick remains in the gun during normal use. To help prevent blockages, avoid forcing glue sticks into the gun and always use the recommended glue stick type for your model.

If the blockage cannot be cleared safely, refer to the product instructions or seek further assistance rather than forcing the glue stick through the gun.

Before applying adhesive, ensure both surfaces are clean, dry and free from dust, grease, oil, rust and loose material.

Removing contaminants and old residues helps the adhesive bond more effectively and can improve the strength and durability of the finished bond.

Bostik Glitter Glue typically dries within 30 minutes when applied as a thin layer.

However, due to the water content within the glitter glue, when applied in thick layers the drying time can increase and the adhesive will reach full bond in 24 hours after application. But trust us - it's worth the wait!

0.5 grams of Blu Tack® will hold an approximate 105 gram load, but Blu Tack® is not designed to hold heavy objects.

Bostik Spray Adhesive residue can be softened by carefully applying white spirit with a clean cloth. Once the adhesive begins to loosen, it can be wiped away more easily from the affected surface.

Before treating a larger area, test the cleaning method on a small hidden section first. This helps ensure the solvent is suitable for the material and does not affect the surface finish. 

If you get Glu Stik on a surface by mistake, remove as much of the adhesive as possible and clean the affected area promptly.

Because Glu Stik is water-soluble, it can be cleaned using water. The best cleaning method may vary depending on the material or surface involved, so test on a small area first where appropriate.

Wipe the affected area with an acetone dampened cloth or nail polish remover containing acetone.

No, Blu Tack is not tested on animals and does not contain ingredients derived from animals or animal by-products.

This means Blu Tack is manufactured without animal-derived ingredients while continuing to provide the reusable adhesive performance it is known for.

Yes, Bostik Fabric Glue is machine-washable so is perfect for clothing repairs and can withstand everyday wear and tear.

Bostik Super Glue Liquid and Bostik Super Glue Gel are water and heat resistant. However, they are not described as waterproof in the available product information.

For applications that may be exposed to moisture, check that the adhesive is suitable for the intended use and follow the product instructions for best results.

Viscosity is the measure of a fluid's resistance to flow. The higher the viscosity of a liquid, the thicker it is and the greater the resistance to flow. 

Glue can be various measures of viscosity, with each measure having it's own benefits based on the application required. Low viscosity glue will spread easily, whereas high viscosity glue is ideal for vertical surfaces or areas that need a concentrated application.

The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.

Yes. Its non-slump formulation makes it suitable for application on vertical and overhead surfaces.

Yes. The cured silicone rubber provides resistance to vibration and thermal cycling, helping maintain sealing performance under demanding conditions.

Yes. Uncured excess can be removed with a cloth dampened with mineral turpentine or an appropriate solvent. Once fully cured, the sealant can be removed mechanically by trimming.

Ensure the surfaces are clean and dry, cut the nozzle to the desired bead size and apply a continuous, even 2–4 mm bead. Avoid repositioning the sealant once the skin has formed and allow it to cure fully.

If you're unsure which adhesive to use, try the Bostik Glue Guide.

The Bostik Glue Guide helps you identify the most suitable adhesive based on the materials you want to bond and the type of project you are working on. Whether you're repairing, crafting or completing a DIY project, it can help you choose the right product.

Bostik Fabric Glue forms a permanent bond by adhering to the fibres of the fabric.

Bostik Gasket Sealant typically reaches full cure within 24 hours under standard curing conditions. It develops a tack-free surface in approximately 8-15 minutes after application.

Curing time can vary depending on factors such as temperature, humidity and application conditions. For best results, apply the sealant to clean, dry surfaces and follow the product instructions.

Bostik Gasket Sealant can withstand temperatures from-60°C to +260°C intermittently, with intermittent exposure up to 343°C.

This high temperature resistance makes it suitable for a range of automotive, mechanical and industrial sealing applications where exposure to heat is required.

Store the product in its original, unopened packaging in cool, dry conditions. The stated shelf life is 18 months. Once opened, reseal the package immediately after use to minimise moisture exposure.

Surfaces should be clean, dry and free from dust, dirt, rust, oil, grease and other contaminants. Non-porous surfaces should be cleaned with a suitable solvent, while porous substrates may require mechanical preparation.

Yes. The cured sealant is designed to resist oil, water and automotive fluids, making it suitable for demanding sealing applications.

Yes. It is formulated as a high-temperature gasket maker and automotive sealant and is suitable for applications involving oil, water, automotive fluids, vibration and thermal cycling.

Yes, Bostik Super Glue products are classified as flammable. Keep them away from heat, sparks, open flames and other ignition sources during use and storage.

Always follow the product instructions and safety precautions when using Bostik Super Glue to help ensure safe handling and storage.

Yes, Bostik Super Glue Liquid and Bostik Super Glue Gel are heat resistant and have a working temperature range of-55°C to +80°C. This makes them suitable for a wide range of repair and bonding applications where temperature variations may occur.

Yes, Bostik Hot Glue Sticks produce a waterproof bond that is highly resistant to water, temperature variations and many common solvents.

This durable performance makes them suitable for a wide range of craft, hobby and repair applications where a long-lasting bond is required.

Learn how to remove super glue by watching our handy video: How to remove Super Glue from your fingers

Bostik Gasket Sealant is available in Red, Black and Grey variants.

Bostik Gasket Sealant is an RTV silicone sealant and formed-in-place gasket (FIPG) material designed for sealing and bonding applications. It can be used for flanged joints in transmissions, compressors, pumps and other equipment, as well as valve and timing covers, crankcases, radiators and thermostats.

Bostik’s Super Glue Liquid and Super Glue Gel are made of ethyl cyanoacrylate. Cyanoacrylate is an acrylic resin that cures almost instantly. The fast-setting, ultra strong and colourless properties of our super glue formulas make them perfect for day-to-day household uses in repair or DIY projects.

The main difference between a multipurpose glue and a super glue is the drying time. A super glue bonds within seconds (almost instantly) and an all purpose adhesive bonds within minutes (typically within five minutes). Multipurpose glue is ideal for use on a wide range of substrates, including paper, whereas super glue is more suited for use on solid surfaces only.

Yes, Bostik Fabric Glue can help prevent fabric from fraying. It creates a strong yet flexible bond that helps secure loose fibres and reinforce fabric edges.

Bostik Fabric Glue is a practical solution for repairs, alterations and craft projects where a neat, long-lasting finish is required.