Under standard curing conditions, the sealant develops a tack-free surface within approximately 8–15 minutes and typically reaches full cure within 24 hours. Actual curing time depends on temperature…
Filter by content type
results
68 new results
Eighteen (18) months when stored off the ground in a cool, dry weatherproof environment.
For EXTERIOR and INTERIOR plastered concrete applications. (Surface of walls, ceilings, beams and columns)For pre-cast and poured concrete
All types, sizes, & application of ceramic tiles Fully vitrified tiles (e.g. porcelain, mosaic etc.) applied vertically up to 30cm x 30cm in size Will give extra strength, better non…
El Supremo is used for the for the following:Bonding old to new concreteDowelling of metal to concreteBonding joints between various material like concrete, metal, wood, glass, ceramics and…
El Kapitan is used for the for bonding and finishing of:Marine plywoodWooden boatWoodcraftConstructionCeramicsFurmiture
As a contact adhesive for installation of wall and floor panelsMost bonding applications where high strength, gap filling, one component adhesive is requiredTimber, metal, cementitious and plaster…
0.5 grams of Blu Tack® will hold an approximate 105 gram load, but Blu Tack® is not designed to hold heavy objects.
Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of…
Surfaces should be clean, dry and free from dust, dirt, rust, oil, grease and other contaminants. Non-porous surfaces should be cleaned with a suitable solvent, while porous substrates may require…