T170

Non-flammable propellant for cleaning under pressure

Sizes
150 ml

Product overview

Air Spray consists of a non-inflammable propellant for cleaning under pressure and can even be applied on highly inflammable spots.

Downloads & resources

Bostik DIY Malaysia Repair Air Cleaning Spray T170 Technical Data Sheet (82.36 KB)

Bostik DIY Malaysia Repair Air Cleaning Spray T170 Safety Data Sheet (121.02 KB)

How to use

  1. Hold the Spray in an Upright Position!
  2. Do not tilt it more than 30º
  3. Point spraying device at the parts to be cleaned and apply spray with short breaks in-between till there is no more dirt or dust to be seen.

FAQs

What should you do before using T170 Air Spray?

Before using Bostik T170 Air Spray, make sure the item or area you want to clean is accessible and free from loose objects that could be disturbed by compressed air.

Hold the can upright during use and direct short bursts of air at the area being cleaned. Bostik T170 Air Spray is designed to remove dust and debris from hard-to-reach locations such as keyboards, electronic components, machine parts, cameras and instruments.

Stuck on what glue to use?

Gary

Use this guide to find out what product to use for your job.

Start the Glue Guide