Create

The fumes that glue guns can release are very rarely toxic but can sometimes be irritating for those who suffer from respiratory problems. Take care when using the glue guns as like most organic fumes, there is a possibility they could ignite depending on the environment they are used in.

No - using the wrong glue sticks could block and damage your Bostik glue gun. We have three variations of glue gun, Handy Hot Melt Glue Gun, DIY Hot Melt Glue Gun and Craft Cool Melt Glue Gun and each of our glue guns have specific glue sticks that are available. 

Bostik glue gun sticks are sold as individual packs of 14 Hot Melt Glue Sticks or 26 Cool Melt Glue Sticks.

Bostik Blu Stick is acid-free so it's safe to use with your photos.

Yes - you can use our double sided sticky pads for mirrors. Bostik Foam Pads are acid and lignin-free meaning they will not mark or stain a mirrored surface.

Bostik PVA Glue is white when applied and dries clear, also referred to as drying transparent or opalescent. 

Yes, Bostik PVA glue can stick to leather and many fabrics, but it is best suited for light-duty or craft applications. For stronger, more flexible, and longer-lasting bonds, specialised leather glue or fabric adhesives are recommended.

Blu Tack® is also available in a 5 colour pack - pink, green, blue, yellow & orange.

Bostik Blu Stick is a great way to show you where you've applied your glue, but it actually dries totally clear!

If you haven't used all of the glue stick that you inserted into the glue gun, do not try to remove it. Removing the glue stick could damage the internal components of the gun - regardless if the adhesive is runny or hard.

Simply leave the glue stick in the glue gun until you use it again. Surplus glue stick may be trimmed off using a sharp knife.

When the glue stick is almost gone, you can insert another stick and continue to use the glue gun as normal.

A glue gun’s lifespan can vary depending on its use. Sometimes, a glue gun can stop working due to a glue stick being jammed or stuck in the gun, causing a blockage in the nozzle. Ensure you are always using the right glue sticks for your glue gun to avoid this problem.

Drying time depends on the material being bonded. Like most craft glues, Bostik PVA Glue reaches full cure on paper and card in around 12 hours. On wood, full cure takes around 24 hours. For the neatest finish, leave the project flat and avoid handling it while the bond develops.

Bostik Glitter Glue typically dries within 30 minutes when applied as a thin layer.

However, due to the water content within the glitter glue, when applied in thick layers the drying time can increase and the adhesive will reach full bond in 24 hours after application. But trust us - it's worth the wait!

0.5 grams of Blu Tack® will hold an approximate 105 gram load, but Blu Tack® is not designed to hold heavy objects.

Bostik Spray Adhesive can be dissolved by dabbing the adhesive with a clean, dampened cloth of white spirit.

Bostik Glu Stiks are children-and mess-friendly, so can easily be cleaned with warm soapy water.

Blu Tack® is not tested on any animals nor does it contain ingredients made from animals nor by products of animals.

Most solvent-based adhesives are flammable. When using Fast Tak always work in a ventilated area and do not breathe in vapours. Avoid exposing the product to any ignition sources. Do not smoke when working with adhesives.

Bostik Glu Stik is non toxic, solvent-free and easy to use, so little ones can enjoy getting stuck in - just make sure they avoid contact with their eyes.

Yes. Bostik PVA Glue is supplied as a liquid glue in an easy-to-use plastic bottle with a resealable cap. It is ready to apply straight from the bottle and can be used for arts and crafts projects, modelling, woodworking, school projects and other simple creative tasks.

Bostik PVA Glue is suitable for school projects and is ideal for both schools and home, but it is not described as “just school glue.” It bonds to fabric, but it is not described as the same as fabric glue. Information about leather glue is not available in the provided source.

Bostik PVA Glue is described as a multi-purpose, solvent free white glue and as a general purpose PVA glue, but the provided source does not state that all multi-purpose glues are PVA glues. 

Blu Tack® is a non-toxic, non-harmful substance and will not cause any problems if swallowed, only mild discomfort. If any discomfort experienced continues, we recommend seeking medical advice.

Yes - adhesive from a glue gun is waterproof. It is extremely water resistant and can deal with varying temperatures, other solvents and even eroding, making it a long-lasting, ultra strong adhesive.

Please rinse thoroughly and immediately with water if you haven't already. If any discomfort or irritation persists, seek medical assistance.

Glitter glue pens allow you to easily and neatly add sparkle to your pages or art projects. You can use the glue to create glitter borders in scrapbooks, outline key paragraphs in diaries, jazz up birthday balloons and decorate a photo frame or pencil case and so much more!

Blu Tack® is great for both children and adults, however we advise not giving it to children under the age of three.

Bostik Glu Dots are pressure-sensitive, double-sided, adhesive dots available in a removable or permanent formula.

Our Glu Dots can stick to almost anything including paper, wood, plastic, foam, metal, glass and painted surfaces. They're perfect for arts and crafts projects such as scrapbooking, sticking up posters to walls, card making, collages and model making at home, the office or in schools.

Bostik Glu Dots Removable are ideal for arts & craft, scrapbooking, card marking, collages and model making. Bostik Glu Dots Removable are the perfect size to allow for precise and accurate placing of small objects such as sequins, beads, rhinestones, wiggly eyes and many other craft embellishments. Bostik Glu Dots Removable stick to almost anything, including paper, wood, plastic, metal and glass.

Viscosity is the measure of a fluid's resistance to flow. The higher the viscosity of a liquid, the thicker it is and the greater the resistance to flow. 

Glue can be various measures of viscosity, with each measure having it's own benefits based on the application required. Low viscosity glue will spread easily, whereas high viscosity glue is ideal for vertical surfaces or areas that need a concentrated application.

Bostik PVA Glue is a general purpose PVA glue suitable for most arts and crafts projects. As a craft PVA glue, it can be used for scrapbooks, card making, modelling, and school projects. It can also be used to make slime, create a glossy finish on projects, or be mixed with powder for finger painting. 

Bostik PVA Glue is a water-borne adhesive based on vinyl acetate homo-polymer and polyvinyl alcohol. In simple terms, it’s a versatile white liquid glue commonly used for everyday DIY and household projects such as bonding wood, paper, and other porous materials.  

Fast Tak Permanent spray glue is a permanent contact adhesive in an aerosol format. It applies as a mist and is suitable for bonding a wide variety of materials including paper, card, foam, leather, rubber, plastic, metal, wood, stone and even concrete.

Simple and easy-to-use in a few seconds, our Fast Tak Permanent caters to all kinds of craft and DIY needs, whether that’s craft creations, furniture repairs, clothing repairs and more.

Simply shake to wake, spray from 15 to 20 cm, allow to dry for a few seconds, line up your surfaces and press together to stick.

The Bostik Handy Hot Melt Glue Gun and DIY Hot Melt Glue Gun operates at a high temperature and is great for providing an ultra strong, long-lasting bond for challenging materials such as polypropylene, plastics, ABS, acrylics and even metals. 

The Bostik Craft Cool Melt Glue Gun operates at a lower temperature and is commonly used for bonding heat-sensitive materials such as styro-foam, ribbon and polystyrene, which a hot glue gun could melt. Plus, with being cooler, they can be safer to use, which is great for younger crafters or in school environments.

PVA glue is a specific type of water-borne adhesive, often used for craft, school and light DIY projects. It is commonly used on porous materials such as paper, card, wood and fabric, and is often chosen when a white glue that dries clear is useful. 

“Normal glue” is a broad term and can refer to many different adhesive types, including instant glue, solvent-based glue, fabric glue, leather glue or multi-purpose glue. These may be designed for faster grab, stronger repairs, flexible materials or specialist surfaces. The best choice depends on what you are sticking and how the finished bond needs to perform.

• Bostik Handy Hot Melt Glue Gun operates between +175°C to +200°C.
• Bostik DIY Hot Melt Glue Gun operates between +175°C to +200°C. 
• Bostik Craft Cool Melt Glue Gun operates between +125°C to +135°C.

24 months, unopened, from date of manufacture. Store in dry conditions between +5⁰ C and +25⁰ C

The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.

Bostik PVA Glue bonds to most craft materials, including paper, card, wood and fabric, which is why it’s commonly referred to as a multipurpose glue.

Its versatility makes it useful for projects that combine different materials, such as card decorations, wooden models or fabric details. For best results, surfaces should be clean and dry before the glue is applied.
 

Blu Tack® can be used on non-porous surfaces such as glass, metal and plastic, as well as painted surfaces and vinyl coated wallpaper.

Bostik Glitter Glue Pens can be used on paper, cardboard, wood, felt and more.

Surfaces must be clean and dry, and free from grease or loose materials to work best. If a room or surface conditions are too hot (over 70°C), Blu Tack® will soften and become more difficult to secure items in place.

Pop it in a tightly closed container in a dry, cool and well-ventilated location.

On some surfaces, after a long period of time, Blu Tack® can leave a slight oily mark. This can be removed using removers like citrus oils and desolvers, but as per the guidance of the suppliers. Before using these products, we recommend you test on a small inconspicuous area.