CRAFT COOL MELT GLUE GUN

No, not all glue sticks are suitable for every glue gun. Bostik Handy Hot Melt Glue Gun, Bostik DIY Hot Melt Glue Gun and Bostik Craft Cool Melt Glue Gun are designed to be used with compatible glue sticks that match the requirements of each tool.

Using the correct glue stick size and type helps ensure smooth feeding, consistent adhesive flow and reliable performance. Before using a new glue stick, check that it is suitable for your glue gun model.

No, it is generally recommended to leave a partially used Glue Stick inside the glue gun. Removing it may put unnecessary strain on the feeding mechanism and could affect how the tool operates.

If excess Glue Stick extends from the back of the gun, it can be trimmed carefully. Once the remaining Glue Stick becomes too short to feed properly, simply insert a new Glue Stick and continue using the glue gun as normal.

The lifespan of a glue gun can vary depending on how often it is used, how it is stored and how well it is maintained.

To help extend the life of a Bostik Glue Gun, use the recommended glue sticks, follow the operating instructions and store the tool properly when not in use.

Yes, Bostik Glue Gun Glue is highly water resistant and can provide a long-lasting bond in many DIY and repair applications. Once the adhesive has cooled and fully set, it can withstand moisture, temperature fluctuations and general wear.

To achieve the best performance, apply Bostik Glue Gun Glue to clean, dry surfaces and allow the adhesive to set fully before exposing the bond to demanding conditions.

The main difference between hot melt and cool melt glue guns is the temperature at which the adhesive is applied.

Hot melt glue guns use higher temperatures and are commonly used for general DIY, repair and craft applications where a strong bond is required. Cool melt glue guns operate at a lower temperature, making them suitable for temperature-sensitive materials and applications where a lower application temperature is preferred.

Always use glue sticks that are designed for your specific glue gun to help achieve the best results

Glue gun sticks are generally not considered toxic during normal use. However, when heated, glue gun adhesives may release fumes that can be irritating for some people, particularly those with respiratory sensitivities.

To help ensure safe use, work in a well-ventilated area and follow the instructions provided with the glue gun and adhesive sticks. As with many heated products, avoid using them near potential ignition sources. 

The operating temperature of a glue gun depends on the model.

Bostik Handy Hot Melt Glue Gun and Bostik DIY Hot Melt Glue Gun operate between 175°C and 200°C, while the Bostik Craft Cool Melt Glue Gun operates between 125°C and 135°C.

Using the correct glue gun and compatible glue sticks helps ensure reliable adhesive performance and safe operation.

Use a Bostik Cool Craft Melt Glue Gun when working on craft projects, decorations, model making or other creative applications that benefit from hot melt glue sticks and controlled adhesive application.

Choose Bostik Super Glue when you need a fast-curing cyanoacrylate adhesive for quick repairs and precision bonding. Bostik Super Glue bonds many non-porous materials in seconds, making it a better choice for small repairs where speed and accuracy are important.

Viscosity describes how easily a liquid flows. A low-viscosity adhesive is thinner and flows more easily, while a high-viscosity adhesive is thicker and is less likely to run or drip.

In adhesives and sealants, viscosity can affect application, spreadability and how the product performs on vertical or horizontal surfaces.

Yes, Bostik Craft Cool Melt Glue Guns are designed for household repairs, floristry, art, craft and DIY projects. Their lower melt temperature allows them to bond many common household materials, including polystyrene, wood, leather, fabric and rubber.

They are also suitable for materials that may be sensitive to temperatures above 130°C, making them a practical option for many craft and decorative applications.

To use a Bostik Craft Cool Melt Glue Gun, insert a Bostik Cool Melt Glue Stick into the rear of the gun and plug it in. Allow the gun to warm up for approximately 5 to 10 minutes before use. Once heated, gently press the trigger until the adhesive flows from the nozzle.

Apply the adhesive to one surface, then press the materials together as soon as possible for the best results. Make sure the surfaces are clean and dry before application. The adhesive typically reaches handling strength within 1 minute and full strength within 1 to 2 hours at 20°C.

Bostik Craft Cool Melt Glue Gun is designed for use with Bostik Craft Glue Sticks. These glue sticks have a lower melting point and are intended to be used with the cool melt glue gun system for craft, DIY and household projects.