SPRAY ADHESIVE
Bostik Spray Adhesive Multipurpose is a fast-drying, acid-free spray adhesive designed for quick and easy bonding across small and large surfaces. The colourless formula offers repositionable or permanent mounting depending on how it’s applied, making it suitable for craft projects, home organisation, labelling, and light household tasks. Bostik Spray Adhesive provides instant bonding for many materials and delivers a convenient, mess-free application with no fluorocarbons.
Clear
Features & benefits
Bostik Spray Adhesive is an acid-free adhesive spray that dries quickly for fast project completion. The colourless formula provides clean application without fluorocarbons and works as both a temporary and permanent spray on adhesive depending on how it’s applied. The aerosol glue spray is suitable for craft projects, home organisation tasks, and everyday household bonding applications.
Surface Compatibility
This spray glue adhesive bonds a variety of household and craft materials including paper, cardboard, cork, felt, rubber, polyurethane foam, fibreglass, upholstery fabrics, photographs, and printed materials. For non-porous surfaces, apply the adhesion spray to both surfaces and allow approximately two minutes before bonding. All surfaces should be clean and dry before applying the spray on glue.
Smart advantages
Safe, quick drying
Heat resistant, suitable for use in heat prone areas
Specifically designed for flat sheet laminating
Downloads & resources
Bostik DIY Australia Create - Spray Adhesive Technical Data Sheet (221.61 KB)
Bostik DIY Australia Create - Spray Adhesive Safety Data Sheet (701.74 KB)
How to use
Bostik Spray Adhesive can be used for mounting photographs, printed materials, artwork, labelling, lining shelves with paper, sticking foils, and a variety of other household applications. It’s also suitable for bonding:
- Paper
- Fabrics, including felt
- Cork
- Rubber
- Polyurethane foam
- Fibreglass
For best results, ensure all surfaces are clean and dry before application. Shake the can well before use, then hold the can approximately 20–25cm away from the surface and spray evenly. For non-porous surfaces, spray both surfaces and allow approximately two minutes before pressing them together.
For a temporary or repositionable bond, spray one surface only and allow the adhesive to dry for 5–10 minutes before bonding. After use, prevent nozzle blockages by turning the can upside down and spraying away from you for a few seconds. Any overspray can be cleaned immediately using a cloth dampened with mineral turps.
Applications
Bostik Spray Adhesive can be used for mounting photographs, printed materials, artwork, and labels. A craft spray glue that is also suitable for lining shelves with paper and bonding materials such as foil, cardboard, cork, felt, rubber, fibreglass, upholstery, and fabrics. For foam projects, Bostik Spray Adhesive can be used as a foam adhesive spray, when applied in multiple light coats. It can also be used for fast installation of floor and carpet tiles, making it a practical glue spray for crafts and household projects.
Limitations
Bostik Spray Adhesive is not suitable for applications requiring high-strength, heat-resistant, or waterproof bonds. When using this glue spray for foam, apply several light coats instead of one heavy coat when bonding polystyrene foam. This adhesive glue spray is highly flammable and should be stored below 25°C and away from direct sunlight. Do not puncture or incinerate the can, even when empty.
Related tutorials
Wrapping paper project
Dino Piggy Bank
DIY wall art
FAQs
How to dissolve Spray Adhesive?
Bostik Spray Adhesive can be dissolved by dabbing the adhesive with a clean, dampened cloth of white spirit.
Is Bostik Spray Adhesive flammable?
Most solvent-based adhesives are flammable. When using Spray Adhesive always work in a ventilated area and do not breathe in vapours. Avoid exposing the product to any ignition sources. Do not smoke when working with adhesives.
What is Spray Adhesive and how to use it?
Spray Adhesive is a permanent contact adhesive in an aerosol format. It applies as a mist and is suitable for bonding a wide variety of materials including paper, card, foam, leather, rubber, plastic, metal, wood, stone and even concrete.
Simple and easy-to-use in a few seconds, our Spray Adhesive caters to all kinds of craft and DIY needs, whether that’s craft creations, furniture repairs, clothing repairs and more.
Simply shake to wake, spray from 15 to 20 cm, allow to dry for a few seconds, line up your surfaces and press together to stick.
How do I know how to stick two materials together?
Discover our new Bostik Glue Guide to discover what product to use.
CLAG® PASTE
GLU STIK
HOBBY CRAFT PVA GLUE
MINI HOT MELT GLUE GUN
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide