NAIL IT INSTANT GRAB
High-quality professional adhesive based on MSP (Modified-Silyl Polymer) technology.
White
Product overview
Bostik Nail It Instant Grab is a high-quality professional adhesive based on MSP (Modified-Silyl Polymer) technology.
Designed to have extremely high initial tack, it cures under the influence of atmospheric humidity to form a durable elastic rubber.
Bostik Nail It Instant Grab is a universal bonding adhesive and can be used on many building materials.
- Extremely high initial tack
- No fixation or support needed during curing.
- Suitable for interior and exterior use
- Resistant to moisture, weather and UV
- Adheres without the aid of primer on most, even damp surfaces.
Downloads & resources
Bostik DIY Australia Bond - Nail It Instant Grab Technical Data Sheet (160.58 KB)
Bostik DIY Australia Bond - Nail It Instant Grab Safety Data Sheet (104.83 KB)
How To Use
Preparation
- Due to the structure of Bostik Nail It Instant Grab, it is recommended to use a caulking gun with the right transmission in combination with the V nozzle supplied.
- For optimum performance, surfaces to be bonded should be clean and free of dust, wax, grease or any loose or flaking paint.
- Bostik Nail It Instant Grab adheres perfectly without the use of a primer on most non-porous substrates. Porous substrates should be pre-treated with Bostik Simson Prep P Primer. Always test adhesion prior to application as limitations may apply.
Application
- Apply adhesive with the provided V-nozzle in vertical stripes, leaving 10-20 cm distance in between. Ensure the V-Nozzle faces upwards throughout application, resulting in a clean triangular peaked bead of adhesive. DO NOT APPLY ADHESIVE IN DOTS.
- Bring the materials into position and press well to make sure that the thickness of the adhesive is a minimum 2-3mm between material and surface.
- Because of the high initial strength, support during curing is usually not necessary.
FAQs
How do I know how to stick two materials together?
Discover our new Bostik Glue Guide to discover what product to use.
How does viscosity affect adhesive performance?
Viscosity refers to how thick or fluid an adhesive is. Lower-viscosity adhesives flow more easily, while higher-viscosity adhesives are thicker and provide greater control during application.
The viscosity of an adhesive can influence how it spreads, fills gaps and performs on vertical surfaces, making it an important factor when selecting the right product for a project.
What is the shelf life of the adhesive I have bought and where can I store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide