NAIL IT FAST CURE
Versatile adhesive based on acrylic dispersion.
White
Product overview
Bostik Nail It Fast Cure is a versatile adhesive based on acrylic dispersion. The adhesive cures due to evaporation of water to form a strong and durable bond.
Specifically developed for bonding wood, chipboard, hardboard and uPVC to brick work, stone or concrete. Also suitable for EPS and XPS and bonding ceramic tiles to porous substrates. For interior use.
- Super fast setting
- Interior Use
- Solvent Free
- Almost odourless
- Non-corrosive towards metal
Downloads & resources
Bostik DIY Australia Bond - Nail It Fast Cure Technical Data Sheet (166.6 KB)
Bostik DIY Australia Bond - Nail It Fast Cure Safety Data Sheet (101.88 KB)
How To Use
Preparation
- Substrates must be solid, clean, dry, and free of grease and dust.
- Substrates to be cleared of all loose particles, absorbent substrates do not need to be absolutely dry.
- Very porous substrates like gypsum, aerated concrete, limestone, etc. need to be primed with a mixture of 1-part Bostik NAIL IT FAST CURE and 2 parts water.
- Always test adhesion prior to application as limitations may apply.
Application
- Apply in vertical stripes or dots with 20 – 40 cm distance in between stripes.
- The material must be put into place by shoving and pushing firmly.
- Finish and smooth with water.
FAQs
How do I know how to stick two materials together?
Discover our new Bostik Glue Guide to discover what product to use.
How do you prepare surfaces before gluing?
Before applying adhesive, make sure both surfaces are clean, dry and free from dust, grease, oil, rust, loose material or other contaminants.
Removing residues and preparing the surfaces properly helps improve adhesion and gives the best chance of achieving a strong, durable bond.
How does viscosity affect adhesive performance?
Viscosity refers to how thick or fluid an adhesive is. Lower-viscosity adhesives flow more easily, while higher-viscosity adhesives are thicker and provide greater control during application.
The viscosity of an adhesive can influence how it spreads, fills gaps and performs on vertical surfaces, making it an important factor when selecting the right product for a project.
What is the shelf life of the adhesive I have bought and where can I store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide