DIY HOT MELT GLUE GUN
Heavy duty hot glue gun for DIY, household and general repairs
Clear
Features & benefits
Bostik DIY Hot Melt Glue Gun is a heavy duty hot glue gun for DIY tasks, craft projects and household repairs.
This heavy duty hot melt glue gun operates at high temperatures from a mains electricity supply to achieve an ultra strong, permanent bond to most materials including ceramics, wood, leather, fabric, metal, plastic, glass and more.
Bostik DIY Hot Melt Glue Gun incorporates a safety warning light to indicate the gun is switched on and also has a retractable stand which holds the gun in an upright position when not in use.
DIY Hot Melt Glue Sticks (pack of 14) also available.
- Heavy duty hot glue gun, ideal for DIY tasks and household repairs
- Ultra strong, long-lasting bond
- Trigger control to glue on demand
- Constant thermostatic control and safety warning light
- Includes 2 hot glue gun sticks
- UKCA and CE approved
Technical information
Bostik DIY United Kingdom Repair - Hot Melt Glue Gun Technical Data Sheet (413.48 KB)
Bostik DIY United Kingdom Repair - DIY Hot Melt Glue Gun Sticks Technical Data Sheet (414.29 KB)
The file is stored on an external website, please follow the link
Watch video
How to use
Preparation
Fit the metal stand onto the front of the Hot Melt Glue Gun in the slots by the nozzle
Load a Bostik DIY Hot Melt Glue Gun Stick through the grip ring at the rear of the gun and press the trigger several times until the stick is positioned firmly in the gun
Plug in the gun and a light will come on at the rear to indicate that it is in operation. Then, rest the gun on its stand and allow to warm up for approximately 5 minutes
Ensure surfaces to be bonded are clean and dry
Application
Press trigger until adhesive flows from nozzle. To ensure a continuous flow of glue, insert further hot glue gun sticks into the rear of the gun and wait a few minutes until the stick has heated to the correct temperature. DO NOT FORCE THE TRIGGER
Apply hot melt adhesive to one surface. Press surfaces together within 15 seconds. Use of clamp or other holding device is not necessary
Unplug the heavy duty glue gun when finished and leave to cool before storing. Trim surplus glue stick from the gun using a sharp knife. Do not pull glue sticks from the back of the gun as damage may occur
How to remove
The adhesive can only be removed mechanically once cured by scraping carefully with a blade edge.
A residual thin film will remain which can then be removed using a solvent cleaner.
Sensitive surfaces may be damaged by the hot adhesive or by the solvents used in the cleaning process. Always carry out a test before attempting removal.
FAQs
What is the operating temperature for a glue gun?
- Bostik Handy Hot Melt Glue Gun operates between +175°C to +200°C.
- Bostik DIY Hot Melt Glue Gun operates between +175°C to +200°C.
- Bostik Craft Cool Melt Glue Gun operates between +125°C to +135°C.
Is the glue from a glue gun waterproof?
Yes - adhesive from a glue gun is waterproof. It is extremely water resistant and can deal with varying temperatures, other solvents and even eroding, making it a long-lasting, ultra strong adhesive.
Are glue gun sticks toxic?
The fumes that glue guns can release are very rarely toxic but can sometimes be irritating for those who suffer from respiratory problems. Take care when using the glue guns as like most organic fumes, there is a possibility they could ignite depending on the environment they are used in.
How long do glue guns last?
A glue gun’s lifespan can vary depending on its use. Sometimes, a glue gun can stop working due to a glue stick being jammed or stuck in the gun, causing a blockage in the nozzle. Ensure you are always using the right glue sticks for your glue gun to avoid this problem.
Can I use any glue sticks with my glue gun?
No - using the wrong glue sticks could block and damage your Bostik glue gun. We have three variations of glue gun, Handy Hot Melt Glue Gun, DIY Hot Melt Glue Gun and Craft Cool Melt Glue Gun and each of our glue guns have specific glue sticks that are available.
Bostik glue gun sticks are sold as individual packs of 14 Hot Melt Glue Sticks or 26 Cool Melt Glue Sticks.
What is the difference between a hot melt glue gun and cool melt glue gun?
The Bostik Handy Hot Melt Glue Gun and DIY Hot Melt Glue Gun operates at a high temperature and is great for providing an ultra strong, long-lasting bond for challenging materials such as polypropylene, plastics, ABS, acrylics and even metals.
The Bostik Craft Cool Melt Glue Gun operates at a lower temperature and is commonly used for bonding heat-sensitive materials such as styro-foam, ribbon and polystyrene, which a hot glue gun could melt. Plus, with being cooler, they can be safer to use, which is great for younger crafters or in school environments.
How can you remove a glue stick from a glue gun?
If you haven't used all of the glue stick that you inserted into the glue gun, do not try to remove it. Removing the glue stick could damage the internal components of the gun - regardless if the adhesive is runny or hard.
Simply leave the glue stick in the glue gun until you use it again. Surplus glue stick may be trimmed off using a sharp knife.
When the glue stick is almost gone, you can insert another stick and continue to use the glue gun as normal.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER