Can BA940 be used upside down?
Yes. The 300ml format is equipped with a 360° spray system, allowing effective application even when the can is held upside down. This makes it ideal for hard-to-reach or awkward areas.
Are moisture absorbers toxic?
No - Bostik Breathe is a non-electric dehumidifier consisting of a dye-free, fragrance-free formula that uses only the essentials to remove moisture from the home.
How do I store my adhesive?
Most adhesives have a shelf life of at least 12 months if stored in a cool (below 25°C), dry place in its original moisture-tight container. If the material is kept beyond the recommended shelf life,…
How long does Home Silicone Sealant take to dry?
The sealant forms a skin in approximately 45 minutes under normal conditions. Full curing typically takes around 24 hours per 2 mm thickness, depending on temperature and humidity.
How long does Marine Silicone take to dry?
Marine silicone dries to touch in approximately 25 minutes and reaches full cure in about 24 hours (depending on conditions and thickness).
How to dissolve silicone sealant
Cured silicone sealant cannot simply be dissolved. It must be removed either mechanically or by using a specialised silicone stripper designed to break down the material.
How to get label glue off plastic
Wet adhesive can be removed using a solvent such as acetone, applied with a clean cloth. For dried adhesive, it can be removed mechanically or softened with acetone before wiping away. Always test…
How to clean silicone sealant?
For best results, clean silicone sealant while it is still uncured using a solvent such as turpentine or paraffin and a clean cloth. Once cured, the sealant can only be removed mechanically, for…
How do moisture absorbers work?
Bostik Breathe moisture absorber works by absorbing water molecules in damp air as moisture passes through the device. Bostik Breathe is a dual tablet system providing up to 33% more absorption…
How do I store my silicone?
To maximize the shelf life of an opened silicone cartridge, we recommend that the nozzle be removed and a piece of plastic placed over the cartridge tip after which the nozzle must be screwed back on…