Product overview
Bostik Repair All is an all-purpose repair adhesive for various kinds of surfaces. When cured, it forms a durable rubber.
- Solvent, isocyanate, phthalate, and tin free, with almost no odour
- Dual nozzles for fine and wide applications
- High temperature resistance
- Paintable
- Non-corrosive
Bostik Repair All provides excellent adhesion to many substrates, including wet surfaces. It's best for:
- Joint wood
- Glass
- Metal
- Plastic or mineral based substrates
- Skirting boards
- Cables
Downloads & resources
Bostik DIY Thailand Repair RepairAll Technical Data Sheet (523.5 KB)
How to use
Ensure all surfaces are clean, dry, and free of dust, dirt, rust, oil, and other contaminants.
We recommend a preliminary test of the compatibility of the adhesive with adjoining materials before use.
Application
- To bond non-absorbent surfaces such as metal or glass, use a brush to apply a thin film of adhesive to both surfaces. Allow 5 to 10 minutes drying time and then, having correctly positioned the surfaces, press them together firmly. The bond will be instant and non-adjustable.
- If one or both surfaces are absorbent apply a generous film of adhesive to one surface only and immediately join the two surfaces together under pressure. Note: using this technique, initial bond strengths will be lower.
Cleaning
- Remove excess uncured sealant with a damp cloth or water immediately.
- Cured sealant is best removed by mechanical scraping or sanding.
- Use Bostik Handy Wipe towels to remove adhesive from skin.
Related Tutorials
FAQs
How do I prepare the surfaces to be glued?
- Ensure surfaces are clean; dry free from grease and loose materials.
- For best results, surfaces and surroundings should be pleasantly warm.
- Take out a sheet of dots from the wallet.
- Fold and then tear off, along the perforations, to remove as many dots as required.
What is the shelf life of the adhesive I have bought and where can I store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide