GLITTER GLUE
Ideal for arts and crafts
Blue
Pink
Red
Gold
Green
Silver
Product overview
The Bostik Glitter Glu set contains six Glitter Glu pens in shades blue, pink, red, gold, green and silver.
Each glitter glue comes in an easy-to-use, squeezable tube with a resealable cap to avoid the glue from drying out, and a fine tip for precise application when decorating.
Our Glitter Glu pens are the ideal way to add sparkle to cards, pictures, posters, party stuff and more - without the mess! The glitter is suspended inside the glue so unlike loose glitter, your sparkles stay exactly where you've applied them. Plus, for accidental messes on clothes or other fabrics, our glitter glues can even be washed out.
Use glitter glue pens to write words, colour in shapes and draw fancy borders on your craft projects. Suitable for use on many materials including paper, cardboard, wood, felt and more.
Features & benefits
Superior quality
glitter does not come away after drying
Washable
Mess free
Glitter colours do not fade away
Does not run
Easy to use tubes
Variety of colours
Non toxic – safe for all the family
Does not contain food ingredients such as egg, nut, milk or flour
Additional Information
Bostik DIY Thailand Create Glitter Glue Technical Data Sheet (230.96 KB)
Bostik DIY Thailand Create Glitter Glue Safety Data Sheet (185.01 KB)
How to use
Preparation
Ensure surfaces are clean, dry and free from any dust or loose materials. If using with children, ensure surfaces are protected with old newspaper or similar to avoid damaging the work surface.
Application
- Remove the resealable cap and gently squeeze the tube, spreading the glitter glue precisely where you need it
- If you apply more glitter than you need, you can wipe it off with a damp cloth when it is still wet
- When you've finished, wipe the nozzle clean and replace the cap - your glittery design will be dry in about half an hour, or less if you've spread it thinly
Please note: If applying thick layers of glitter glue, the adhesive will fully bond in 24 hours after application.
How to remove
After use, clean the nozzle and screw threads inside the cap. Once clean, replace the cap.
Should the application nozzle of the pens become blocked with glitter during use, they can be easily unblocked by carefully inserting a piece of wire, for example a paper clip into the opening.
Excess adhesive may be wiped off with a damp cloth before it dries and spills can be washed out of clothes - ideally before the adhesive is dry.
Related tutorials
FAQs
How do I prepare the surfaces to be glued?
- Ensure surfaces are clean; dry free from grease and loose materials.
- For best results, surfaces and surroundings should be pleasantly warm.
- Take out a sheet of dots from the wallet.
- Fold and then tear off, along the perforations, to remove as many dots as required.
What is the shelf life of the adhesive I have bought and where can I store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide