SPRAY ADHESIVE

To remove Bostik Spray Adhesive residue or overspray, clean the affected area as soon as possible after application using a cloth dampened with mineral turps.

The same method can be used to clean the spray nozzle after use. Prompt clean-up can help prevent adhesive build-up and keep the product working effectively.

Most solvent-based adhesives are flammable. When using Fast Tak always work in a ventilated area and do not breathe in vapours. Avoid exposing the product to any ignition sources. Do not smoke when working with adhesives.

Bostik Spray Adhesive is a multipurpose adhesive supplied in an aerosol can for bonding lightweight materials in arts, crafts, displays, decorations and model-making projects.

To use Bostik Spray Adhesive, ensure the surfaces are clean and dry, shake the can well, and spray an even coat onto the required surface from the recommended distance. Allow the adhesive to become tacky before joining the materials together and apply firm pressure to achieve a good bond.

Bostik Spray Adhesive can be used on a variety of lightweight materials and is designed for fast, convenient application.

The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.

1. Ensure surfaces are clean; dry free from grease and loose materials.
2. For best results, surfaces and surroundings should be pleasantly warm.
3. Take out a sheet of dots from the wallet.
4. Fold and then tear off, along the perforations, to remove as many dots as required.