Print this project FLORAL CANDLEHOLDER FOR CHRISTMAS | DIY BOSTIK

tuto bougeoir floral banner

Create your own floral candleholder for Christmas with Bostik Fix & Flash glue.

Difficulty
difficulty_level_icon_green
difficulty_level_icon_green
difficulty_level_icon_green
Average time
time_icon_green +50mn
Cost
£
£
£
£
£

Step 1 : Sanding


tuto bougeoir etape 1

Sand the wooden plates gently.

Step 2 : Cutting


Cut the copper tube with a tube cutter or hand saw to create three 7 cm high pieces that will serve as a candle holder. Sand the ends of the tubes to remove any residue.

tuto bougeoir etape 2

Step 3 : Glue


tuto bougeoir etape 3

Glue these tubes onto one of the long wooden plates, spacing them about 5cm apart.

Step 4 : Combine


Then combine the 5 wooden plates to create a rectangular tray that will contain the dried flowers. To do this, glue each part together with Bostik Fix & Flash glue.

tuto bougeoir etape 4

Step 5 : Cut the floral foam


tuto bougeoir etape 5

Once everything is set, cut the floral foam with a paper cutter. Line the bottom of the wooden rectangle, taking care to accomodate the copper tubes.

Step 6 : Plant the flowers


Plant the dried flowers into the foam. Insert the candles into the copper tubes to finish, and set up the festive table.

tuto bougeoir etape 6

Attention

Attention, be sure to choose dried flowers that are fireproof, or non-inflammable for safety reasons. Some dry flowers are covered with product to protect against a possible start of fire.

SOCIAL