SMALL FOAM PADS
Small sized square foam pads, ideal for creating 3D effects and multiple other uses around the home, office or school
White
Product overview
Bostik Foam Pads are square, double-sided sticky foam pads - ideal for creating 3D effects in craft projects.
Acid and lignin-free, the foam sticky pads offer a no mess solution with an easy-to-peel and stick technique. Suitable for most flat surfaces including wood, paper, fabric, plastic and more.
Ideal for card making, paper crafts, model making, scrapbooks and much more.
Features & benefits
Ideal for card making, paper crafts, model making and much more
Contains 50 square foam pads (12mm x 12mm)
No mess and easy-to-use
Acid and lignin-free
Suitable for use on wood, paper, fabric and plastic
Instant stick - no need to wait for them to dry
Downloads & resources
Bostik DIY Singapore Create Foam Pads Technical Data Sheet (364.48 KB)
Bostik DIY Singapore Create Foam Pads Safety Data Sheet (214.98 KB)
How to use
Bostik Foam Pads can be used for any of your crafting needs to create 3D effects in your projects. They are our largest foam pads in the range and are most popular for transforming flat 2D cards to become 3D.
To apply:
- Gently peel a pad off the sheet
- Press one side of the sticky pad to the first surface
- Remove the paper backing
- Stick the second surface to the foam pad
Note: Be careful not to touch the double-sided sticky pad once the paper backing is removed as it might make it less sticky.
How to remove Foam Pads
To remove your double-sided sticky pads, you must carefully and very slowly peel away the pad from the surface it was applied to.
The adhesive properties of your Foam Pads can increase over time so take extra care when removing.
Related tutorials
FAQs
What does the term 'viscosity' mean?
Viscosity is the measure of a fluid's resistance to flow. The higher the viscosity of a liquid, the thicker it is and the greater the resistance to flow.
Glue can be various measures of viscosity, with each measure having it's own benefits based on the application required. Low viscosity glue will spread easily, whereas high viscosity glue is ideal for vertical surfaces or areas that need a concentrated application.
What is the shelf life of the adhesive I have bought and where can I store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.
Stuck on what glue to use?
Use this guide to find out what product to use for your job.
Start the Glue Guide