SOFT PLASTICS ADHESIVE
A strong water resistant polyurethane based adhesive, designed for repairs of objects made from common soft and flexible plastics.
Bostik Soft Plastics is perfect to repair inflatable toys, plastic raincoats, lilos and vinyl swimming pools. Adheres to rigid and soft (plasticized) PVC, ABS, Perspex, Polystyrene (solid), Formica polyurethane, and fiberglass. Suitable as a general purpose glue for DIY repairs around the house and for Art and Craft projects. Also bonds a variety of other materials such as metal, glass, porcelain, ceramic, leather, most rubbers, felt, cork, fabric, cardboard, paper, coated and uncoated wood. Not suitable on plastics such as polypropylene & polyethylene. Not suitable on expanded polystyrene, rayon and acetate fabrics, EPDM and silicone rubber.
Bostik Soft Plastics Adhesive is flammable. Always work in a well ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources. Do not smoke when working with Soft Plastics.
Clear
-
Fast setting -
Waterproof -
Flexible -
Made in South Africa
Documents or Resources
HOW TO USE
Surfaces must be clean, dry and free from all loose materials, dust, dirt, oil, rust and any other contaminants. For improved adhesion, surfaces should be lightly abraded and then wiped with a solvent such as acetone.
Wet stick method
- Spread an even film of adhesive onto both surfaces. If required, use the PVC patch provided.
- Leave the surfaces open for approximately 5 minutes, until almost dry.
- Bring surfaces together firmly until bonded. If necessary, hold together with a clamp or tape.
- Full strength develops after 24 hours.
Dry stick method
- This application method achieves the strongest and fastest bond. It is ideal for heavy duty repairs or when an initial high bond strength is required.
- Spread an even film of adhesive onto both surfaces. Allow to dry completely.
- Re-activate the glue by applying a suitable heat source over the surfaces, e.g. a hairdryer.
- Once the surfaces are very hot, bring together and press firmly to ensure good contact for about 2 minutes.
- Depending on application, object may be handled immediately. Full strength develops after 24 hours.
Frequently Asked Questions
Wet and dried adhesive on applicator tools can be cleaned with acetone, thinners or parrafin. Please refer to the Technical Data Sheet of the specific product for more information.
Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.
Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of days due to general wear and tear and the natural oils in the skin. If skin irritation occurs, consult a doctor.
Related products
SHOE REPAIR ADHESIVE
A flexible rubber and leather adhesive ideal for DIY shoe repairs and other items made from leather, felt and many other materials.
SEW SIMPLE
A solvent free latex based adhesive ideal for certain fabrics and leather.
CABLE ADHESIVE
A strong PVC adhesive ideal for security, television and general electronic cabling to walls and ceilings.
MOUNT IT
NO MORE NAILS! A high strength grab adhesive for easy and quick fixing of various objects without drilling, screwing and nailing.